Westermo MCW-211-F1G-T1G Industrial Ethernet to Fiber Media Converter
- Industrial Ethernet Gigabit Media Converter
- 1 x RJ-45, 10 Mbit/s, 100 Mbit/s or 1 Gbit/s
- 1x SFP (LC connector), 100 Mbit/s or 1 Gbit/s, transceivers
supported
- Brand: WESTERMO
- Product Code: MCW-211-F1G-T1G
Description
The MCW-211-F1G-T1G is an unmanaged media converter with one SFP fibre port supporting 100 Mbit/s or Gbit Ethernet, and one copper port supporting 10/100 Mbit/s or Gbit Ethernet. It is designed for easy use in heavy-duty industrial, maritime, and rail trackside applications. The unit supports 802.1Q long packets which allow all standard industrial Ethernet protocols to be used.
The Westermo range of 100Mbit or Gbit Small Form-factor Pluggable (SFP) transceivers are available as multimode, single mode, or Bi-Di transceivers with distances up to 120 km.
The MCW-211-F1G-T1G is designed for use in industrial applications with dual 9.6 to 57.6 VDC power input. The unique “tri-galvanic” isolation provides isolation between the ports and the power supply and avoids ground loop currents. The IP21 rating ensures that the unit can be installed in locations where condensed water may occur. Only industrial-grade components are used which gives the MCW-211-F1G-T1G an MTBF of 1.426.000 hours and ensures a long service life. A wide operating temperature range of –40 to +74 °C (–40 to +165 °F) can be achieved with no
moving parts.
The MCW-211-F1G-T1G has been tested both by Westermo and external test houses to meet EMC, isolation, vibration, and shock standards, all to the highest levels suitable for heavy industrial, trackside, and maritime environments.
The link fault forward function helps to transfer indications of media failure onto connected ports to ensure that the MCW211-F1G-T1G can be used in resilient network structures. Data rate and flow control can be locked by a DIP switch which can eliminate problems with old legacy Ethernet equipment that is unable to support auto-negotiation.
Enjoy the ease of online inquiries for
the Westermo MCW-211-F1G-T1G Industrial Ethernet to Fiber Media Converter. You can submit your inquiry on our website and get the most friendly
communication with our experts to choose high-quality industrial automation
products at a reasonable price from our Middle East branches (UAE (Dubai), KSA
(Al Khobar, Riyadh), and Oman).
Specification
Interface | |
---|---|
10/100Mb RJ45 (Megabit) Ports | |
10/100/1000Mb RJ45 (Gigabit) Ports | : 1 Port |
100Mb Fiber optic multi mode (Megabit) Ports | |
100Mb Fiber optic single mode (Megabit) Ports | |
1000Mb Fiber optic single mode (Gigabit) Ports | |
1000Mb SFP Fiber optic (Gigabit) Ports | : 1 LC Port |
M12 port | |
Alert Output | |
Standards and protocols | |
Protocols and work standards | IEEE 802.3 ,802.1Q |
General | |
Maximum cable length for data transfer | 120Km with Bi-Di Optical Fiber Optic Module |
MTBF | 1,426,000 hour |
Power Requirements | |
Power consumed | 12V DC, 0.14A and 48V DC, 0.03A |
Type of power input | Terminal input |
POE Support | |
Protection against reverse voltage | |
Protection against overflow | |
LED Indicators | |
LNK/ACT | |
Power | |
Buttons | |
DIP Switch | |
Physical Characteristics | |
Standards and Certifications | EN 50121-4, EN 61000-6-1, EN 61000-6-2, EN 61000-6-4, EN/IEC/UL 60950-1, NEMA TS 2-2003, IP21 |
Housing | ABS |
Dimensions | 34x123x121mm |
Weight | 0.25Kg |
Operating Temperature | -40 to 74 ° C |
Storage Temperature | -50 to 85 ° C |
Operation Humidity | - |
Installation | Din-rail |