PULS YR20.246 MOSFET redundancy module
- 1+1 Redundancy with Automated Load Sharing
- Dual Input with Single Output
- Redundancy OK Signal Included which Reports the Loss of
Redundancy
- 160% (32.5A) Peak Load Capability
- Reverse Input Polarity Protection
- Full Power Between -40°C and +70°C
- Width only 32mm
- Rugged Metal Housing
Description
The YR20.246 is a redundancy module for building redundant power supply systems. It is equipped with two input channels and one output. The two inputs are decoupled by MOSFET technology.
The device is equipped with an automated load sharing feature, which can compensate a small voltage imbalance between the power supplies connected to the inputs in order to achieve an even current share. It also monitors the function of the redundancy circuitry and provides a signal in case of a failure or a high output current, which could prevent redundancy if one power supply fails. If this feature is not required the YR20.242 is available.
The redundancy utilizes MOSFETs instead of diodes for the decoupling of the two input channels. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage. Due to the low power losses, the unit is very slender and only requires 32mm width on the DIN-rail. Large connection terminals allow for a safe and fast installation. The large international approval package makes this unit suitable for nearly every application.
You can place an order for the PULS YR20.246 MOSFET redundancy module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Input Data | |
---|---|
DC-Input Voltage | DC 24V-28V |
Input Current | 2*10A |
Nominal Current Per Input | 10A |
Voltage Drop | 110mV |
Output Data | |
Output Current Range | 20A |
Output Current | 20A |
Output Current Short circuit max. | 26.00A |
Physical Characteristics | |
Dimension | 32mm x 124mm x 117mm |
Weight | 310g |
Mounting | Din-Rail |
Operating Temperature | -40°C ... +70°C |
General | |
Power Losses, typ. | 2.6W |
Connection method | screw terminals |
E Classification | eClass 5.1 27242213, eClass 6.x 27049005, eClass 7.x 27049005, eClass 8.0 27210902, eClass 9.0 27040701, ETIM 4.0 EC000599, ETIM 5.0 EC002540, HS Code HS 85044082 |
Power Losses no Load | 1.7W |
Package Checklist | |
Packaging Unit | 1pc |