PULS YR2.DIODE Diode redundancy module
- Redundancy module for building redundant systems
- Two 10A inputs, one 20A output
- The only 0.85V voltage drop between input and output under full load
- Full output current between -40 and +60°C
- Quick-connect spring-clamp terminals
- Reverse polarity protected input
Description
The YR2.DIODE is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behavior as well as any kind of “Hiccup” overload behavior.
The YR2.DIODE is the perfect solution to use in a redundant system, if the power supply itself is equipped with a DC-OK signal (e.g.: DIMENSION Q-Series). In addition to the YR2.DIODE is the YRM2.DIODE which has a monitoring circuitry included. LEDs and relay contacts signal when one of the two DC-input voltages is not in range due to a non-functioning power supply. Another interesting application for this diode module is to separate sensitive loads from non-sensitive loads. This avoids the distortion of the power quality for the sensitive loads which can cause controller failures.
Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.
You can place an order for the PULS YR2.DIODE Diode redundancy module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Input Data | |
---|---|
DC-Input Voltage | DC 12V-48V |
Input Current | 2*10A |
Nominal Current Per Input | 10A |
Voltage Drop | 800mV |
Output Data | |
Output Current Range | 20A |
Output Current | 20A |
Output Data | |
Output Current Short circuit max. | 25.0A |
Physical Characteristics | |
Dimension | 32mm x 124mm x 102mm |
Weight | 290g |
Mounting | Din-Rail |
Operating Temperature | -40°C ... +70°C |
General | |
Derating | 0.5W/° at >+60°C |
Power Losses, typ. | 8.0W |
MTBF | 47.000.000h |
Connection method | spring clamp terminals |
E Classification | eClass 5.1 27242213, eClass 6.x 27049005, eClass 7.x 27049005, eClass 8.0 27210902, eClass 9.0 27040701, ETIM 4.0 EC000599, ETIM 5.0 EC002540, HS Code HS 85044082 |
Power Losses no Load | 0W |
Package Checklist | |
Packaging Unit | 1pc |