Beijer BSD-L7NHA004U-2 EtherCAT servo drive | Easy World Automation

Beijer BSD-L7NHA004U-2 EtherCAT servo drive

  • EtherCAT slave node
  • Input voltage 1- or 3-phase 200-240 VAC
  • Output power 400 W
  • Output current 3.0 A
  • Motor autodetect and adopt
  • Universal encoder
  • STO safety

  • Brand: BEIJER
  • Product Code: BSD-L7NHA004U-2

Description

High-performance servo drives for synchronized multi-axis (L7NH) or standalone (L7P) movements. All models provide auto-detection and adaptation of the connected motor, various homing modes, advanced tuning with advanced filters, and high-speed motion profile calculation.


Enjoy the ease of online inquiries for the Beijer BSD-L7NHA004U-2 EtherCAT servo drive. You can submit your inquiry on our website and get the most friendly communication with our experts to choose high-quality industrial automation products at a reasonable price from our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).

Specification

Communication
EtherCAT
Modbus RTU
Communication connector RJ45 (1 input, 1 output)
DC-clock cycle time 250 μs
Input ratings
Control supply voltage 200 to 230VAC
Mains supply voltage 1- or 3-phase 200-230VAC
Overload capacity 300 % for 3 s
Supply frequency 50 to 60 Hz
Voltage fluctuations -15 to +10%
Output ratings
Rated power 400 W
Encoder
Encoder type Quadrature(Incremental) BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2 Sinusoidal, Analog Hall
Regenerative
Built-in brake resistor
Built-in brake transistor
Control specifications
Control modes Profile Position Mode Profile Velocity Mode Profile Torque Mode Cyclic Synchronous Position Mode Cyclic Synchronous Velocity Mode Cyclic Synchronous Torque Mode Homing Mode
Frequency response Maximum 1Khz or above (when using 19-bit serial encoder)
Speed control range Maximum 1:5000
Torque control repeatibility Within ±1%
Tuning modes On line auto gain tuning Resonance filters Vibration supression
Control terminals
Analog inputs Input voltage range : -10[V] ~ +10[V] Function : Analog torque limit Total 1 input channel (not allocable)
Analog outputs Total 2 input channels (allocable)
Digital inputs Input Voltage range : DC 12[V] ~ DC 24[V] Total 8 input channels (allocable) The listed 15 functions can be used selectively for assignment. (*POT, *NOT, *HOME, *STOP, *PCON, *GAIN2, *P_CL, *N_CL, PROBE1, PROBE2, EMG, A_RST, SVON, LVSF1, LVSF2) Note) * Basic allocation signal
Digital transistor outputs Signal rating: DC 24[V] ±10%, 120[㎃] Total 4 input channels (allocable) The listed 11 functions can be used selectively for assignment. (*BRAKE±, *ALARM±, *READY±, *ZSPD±, INPOS±, TLMT±, ,VLMT±, INSPD±, WARN±, TGON±, INPOS2±) Note) * Basic allocation signal
Physical Characteristics
IP Class IP20
Size 169x38x172.5 mm
Weight 1.0 kg
Environment Indoors in an area free from corrosive or combustible gases, liquids, or dust.
Humidity 90% RH or less (no condensation)
Operating Temperature 0 to 50 C°
Storage Temperature -20 to +65 C°
Safety 2 input channels (STO1, STO2), 1 output channel (EDM)