Easy World Automation | Nexcom VTC 7220-R Rolling Stock Computer

Nexcom VTC 7220-R Rolling Stock Computer

  • Isolated Power
  • EN50155 conformity
  • Built-in u-blox NEO-M8 module
  • Wake on RTC/SMS via WWAN module
  • Voice communication via WWAN module
  • Intel® Core™ processor dual-core i7-4650U
  • 4 x mini-PCIe socket rich expansion capability
  • Built-in CAN 2.0B. Optional CAN/OBDII module
  • Three SIM cards + dual WWAN modules support
  • Dual accessible & hot-swappable SATA 3.0 SSD/HDD (RAID 0/1)

Description

VTC7220-R features a powerful new generation Intel® Core™ processor i7-4650U. Its CPU performance gives users the ability to adapt to what they need in any rolling stock applications. Its Intel® HD graphics 5000 engine allows users to fully take advantage of VTC7220-R to achieve smooth, seamless, and stunning graphic performance on 3 different video outputs (VGA, DP, LVDS). VTC7220-R is equipped with 2 externally accessible SSD/HDD trays; users can easily download or upload the data on other devices by just removing the storage devices from VTC7220-R. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, VTC7220-R is not only suitable for video surveillance applications but also can meet the demand for other applications, such as infotainment and dispatching systems. With dual SIM cards support, VTC7220-R allows three SIM cards back up each other for better connectivity quality by software. In addition, three SIM cards + dual WWAN modules architecture can increase the bandwidth for a faster data transfer speed. Not only data transmission, but VTC7220-R also supports two-way voice communication. With intelligent power management, VTC7220-R can be waked on by ignition, RTC timer, or SMS/Ring remotely.


You can place an order for the Nexcom VTC 7220-R Rolling Stock Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
Functions 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Reckoning, Built-in G-sensor
CPU Intel® Core™ processor dual core i7-4650U, 1.7GHz
Expansion 1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe), 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Memory 2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default Industrial grade 2GB
Storage 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available), 1 x CFast (externally accessible)
Interface
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN, 1 x Power Switch, 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available), 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port, 2 x Externally accessible SIM card socket (selectable), 1 x Phone jack 3.5mm for 1 x Mic-in, 1 x Phone jack 3.5mm for 1 x Line-out, 1 x Externally accessible CFast card socket with cover, 1 x Reset button, 3 x antenna hole for WWAN/WLAN/BT
I/O Interface-Rear 1 x Circle Type DC Input with ignition, VTC 7220-RA: 24VDC (16.8V ~ 31.2V) Input with 4KVDC isolation, VTC 7220-RB: 36VDC (25.2V ~ 46.8V) Input with 2KVDC isolation, VTC 7220-RF: 110VDC (77V ~ 143V) Input with 4KVDC isolation, 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port, 2 x M12 10/100/1000 Ethernet, 1 x Phone jack 3.5mm for 1 x Mic-in, 1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each, 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz,1 x DP port. Resolution up to 2560 x 1600 @60Hz, 2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/12V selectable), 1 x 16-pin terminal block, - 1 x CAN Bus 2.0B (on board), - 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939), - 8 x Programmable GPIO, (Digital Input) Input voltage (internal type): 5VDC TTL (default), Input voltage (source type): 3 ~ 12VDC, (Digital Output) Digital output (sink type): 5VDC TTL (default), max current: 20mA, Digital output (source type): 3 ~ 18VDC, max current: 150mA, - 4 x Antenna hole for WWAN/WLAN/BT/GPS, - 1 x Fuse (15A)
Power Requirement
Power Management Ignition On/Off control, Programmable On/Off delay timer, System wake up event, Ignition switch, RTC timer ALARM interrupt, Cellular MODEM wakeup signal, System wake up condition, Wake up event is triggered, and DC input voltage is greater than UVP threshold, Timer delay is only applicable for Ignition on, System power down condition, Soft off, or Ignition off, or DC input voltage is lower than UVP threshold, Timer delay is only applicable for Ignition off
Physical Characteristics
Dimensions 260mm (W) x 206mm (D) x 137.5mm (H) (10.24" x 8.11" x 5.39")
Storage temperatures -40°C to 85°C
Humidity 10% to 90% (non-condensing)
Operating temperatures -40°C to 70°C (w/ industrial SSD) with air flow, -20°C to 45°C (w/ commercial HDD) with air flow
Weight 2.5kg
Standards/Certifications CE approval, FCC Class A, EN50155 conformity, - Ambient Temperature EN 50155 TX (-40 ~ 70° C), - Shock and Vibration IEC 61373 class B, - Interruptions of Voltage Supply Class S1,S2, - Supply Change Over Class C1,C2, - EMC EN 50121-3-2
Compatible Operating Systems
Operating System Windows 8, WES8, Window 7, WES7, Linux kernel 3.X