Easy World Automation | Nexcom VTC 7120-C4SK In-Vehicle Computer

Nexcom VTC 7120-C4SK In-Vehicle Computer

  • Build-in Intel® Celeron® Processor 847E 1.1GHz
  • Support two Ethernet LAN ports
  • Dual removable 2.5" SSD tray and CFast slot
  • Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • Support two SIM card slots
  • PCI-104 socket
  • 9 ~ 36V wide range DC power input
  • Smarter power management and low voltage protection
  • Support 4 digital input and 4 digital output
  • Rugged fanless design to meet MIL standard
  • Support 4 channels PoE with IEEE802.3af
  • Wake on RTC/SMS via WWAN module

Description

VTC 7120-C4SK, adopting the high-performance processor, Intel® Celeron® is a new generation of the VTC series. In addition, to keep the advantage of the existing VTC series, it offers dual LAN ports for redundancy, Three high-speed interfaces for storage, 2.5" SATA, and CFast. The warehouse is easily accessible from the front side for maintenance concerns. Furthermore, it offers the ODBII for heavy-duty trucks such as SAE J1939, supporting 4 digital inputs and 4 digital outputs, and a 4-channel PoE. With its rich features, VTC 7120-C4SK can satisfy your demand for in-vehicle applications.


You can place an order for the Nexcom VTC 7120-C4SK In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Intel® Celeron® Processor 847E 1.1GHz
Memory One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB)
Expansion 1 x mini-PCIe socket (PCIe + USB) for WLAN option, 1 x mini-PCIe socket (USB) for WWAN option, 1 x Bluetooth module for option, 1 x On board uBlox NEO-6Q GPS module or optional GPS with dead reckoning
Main Chipset QM67
Interface
I/O Interface-Front 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication), 2 x SIM card socket (selectable), 1 x System reset button, 1 x USB 2.0 host type A connector, 1 x Power button, 1 x CFast with protection cover, 2 x Accessible 2.5” SATA II SSD tray, Optional RAID 0,1 supported (optional lockable storage available), 4 x LED's for power, storage, WLAN/WWAN and GPIO, G sensor
I/O Interface-Rear 1 x 9 ~ 36VDC input with ignition and 27.8W typical power consumption, 1 x 12V/4A DC output, SMBus, 1 x DB26 LVDS interface with 12V and USB 2.0, 1 x DB15 VGA, 1 x DB9 RS-232 (default) or optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939), 1 x DB9 RS-422/485, 1 x DB9 female connector for 4 x DI and 4 x DO, (Digital Input) Input voltage (Internal Type): 5VDC TTL (default), Input voltage (Source Type): 3 ~ 12VDC, (Digital Output) Digital output (Sink Type): 5VDC TTL (default), max current: 20mA, Digital output (Source Type): 3 ~ 24VDC, max current: 250mA, 2 x USB 2.0 host type A connector, 2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet, 4 x RJ45 with LEDs for 10/100/1000Mbps Ethernet and support IEEE802.3af PoE (Max. 60W), 1 x Line-out, 1 x Mic-in, 1 x SMA-type GPS antenna connector, 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)
Power Requirement
Power Management Selectable boot-up & shut-down voltage for low power protection by software, Setting 8-level on/off delay time by software, Status of ignition and low voltage status can be detected by software, Support S3/S4 suspend mode
Physical Characteristics
Dimensions 260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51")
Operating temperatures -30°C to 50°C (w/ industrial SSD) with air flow, -20°C to 40°C (w/ commercial HDD) with air flow
Storage temperatures -35°C to 85°C
Humidity 10% to 90% (non-condensing)
Housing Aluminum enclosure with fanless design
Weight 4 Kg (8.81 Lb)
Environment Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock
Standards/Certifications CE approval, FCC Class A, e13 Mark
Compatible Operating Systems
Operating System Windows XP/WES2009, WES 7E, Win7 Pro for Embedded, Linux 2.6