Nexcom NIO 51 Industrial IoT Gateway
- Selectable 2.4GHz/5GHz
- Web-based configuration
- SNTP client for time synchronization
- Support nCare remote configuration
- Support Serial, Ethernet and Wi-Fi interface
- High immunity to surge, ESD & EFT protection
- Support EZ Mesh and client Wi-Fi operation mode
- Built-in offline port buffer with over 20 MB of storage
- Support Modbus TCP, RTU, ASCII/ MQTT/ Transparent
- Up to 921.6 Kbps baud rate for RS-232/422/485 transmissions
Description
NIO 51 brings wireless connectivity from serial devices or Ethernet devices perfectly to the Wi-Fi Mesh backbone in smart factories. Thanks to the Wi-Fi Mesh technology, every device connecting to NIO 51 can easily keep multiple Wi-Fi connecting paths to either IWF310 EZ Mesh backbone or neighbor NIO51 devices to communicate with the control center even if the devices are in moving status such as AGV application in factories.
NIO 51 provides flexible conversion between Modbus RTU to Modbus TCP protocols as well as serial to Ethernet/Wi-Fi interfaces within one box. It’s also equipped with high immunity to EMC high-level protection in Surge, ESD, and EFT, wide operation temperature, and redundant power so people do not need to be concerned about the impact of harsh environments. Optional mPCIe port can be used as 3G/LTE WAN connection in mobility applications or environments where no Wi-Fi coverage is possible.
NIO 51 fills the communication gap between legacy edge nodes to the control center, enabling field data to be harnessed for manufacturing process optimization, asset management, and preventive maintenance.
You can place an order for the Nexcom NIO 51 Industrial IoT Gateway, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
Wi-Fi Operating Mode | EZ Mesh, Client router |
Wi-Fi Radio | IEEE802.11a/b/g/n , MIMO 2 x 2 |
Connector type | DC input: Phoenix contact terminal block, Ethernet: RJ-45 connector, Serial signal: DB9 |
LED Indicators | |
LED Indicator | 1 x Power/status, 1 x Serial status, 3 x RSSI indicator, 1 x Wi-Fi 2.4/5GHz indicator, 1 x Link/Act indicator, 1 x Extension module |
Interface | |
Serial Port | RS232/422/485 with isolation, - Data bits: 8, - Stop bits: 1 , - Parity: none, even, odd, - Baud rate: 9600 bps to 921.6 Kbps |
Ethernet | 10/100 Mbps |
Serial Port Characteristics | Flow control: XON/XOFF, Serial data log: 64 KB, Offline port buffering: 20MB, Max. RS485 connecting device number: 128, Min. concurrent TCP client number: 10 |
Power Requirement | |
Power Supply | 12~48 VDC |
Physical Characteristics | |
Dimensions | 81.4 mm x 122.6 mm x 35 mm |
Housing | SGCC chassis with fanless design |
Shock Protection | 0G, half sine, 11ms, IEC60068-27 |
Vibration Protection | - Random: 2Grms @ 5~500 Hz, IEC60068-2-64, - Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6 |
Operating Temperature | -40°C to 75°C |
Storage Temperature | -40°C to 85°C |
Standards and Certifications | EMI: FCC, CE Class A, RF, - FCC: Part 15C, - CE: EN300328, EN301893, EN60950-1, EMC, - EN301 489-1/17, FCC Part 15 subpart B, EN55022/55024, - IEC61000-4-2: level 4, - IEC61000-4-4/5: level 3 , - Serial line surge protection: 1KV (level 2) |
Humidity | operating: 5%~95%, non-condensing, RoHS compliant |
Mounting | Wall mounting, DIN mounting |
Security | |
Wi-Fi Security (Client Mode) | WEP (64/128), WPA/WPA2 mixed, WPA2-personal (PSK+CCMP/AES) |
Standards and protocols | |
Protocol | Modbus TCP, Modbus RTU, Modbus ASCII, MQTT client for serial/Ethernet to Wi-Fi (Phase II), Transparent mode for Serial to Wi-Fi/Ethernet |
Button | |
Reset Button | Press reset button 10 seconds interval for factory default |