Easy World Automation | Nexcom NET 200-ECM EtherCAT Motion Controller

0

Nexcom NET 200-ECM EtherCAT Motion Controller

  • 3 x USB 2.0 & 1 x USB 3.0
  • 2 x RS232/422/485
  • EtherCAT communication cycle up to 250 μs
  • Support high-level API for CiA 402 profile
  • Onboard Intel® Celeron® processor J1900 Quad Core 2.0GHz
  • Dual independent display from DP and DVI-I
  • EtherCAT technology with NexECM, Class A EtherCAT Master
  • 2 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE/Fieldbus modules

Description

Powered by Intel® Celeron® processor J1900 (formerly codenamed "Bay Trail-D"), NET 200-ECM presents an intelligent PC-based EtherCAT controller for machine automation. It integrates NEXCOM’s EtherCAT Master, NexECM, to perform real-time communication with a cycle time of up to 250 μs. NET 200-ECM also provides API for the CiA 402 profile and a built-in EtherCAT configuration tool to speed up development time for automation users.

Besides EtherCAT communication, NET 200-ECM has high integration ability with two optional mini-PCIe modules and two COM ports, which makes it a flexible controller to connect with optional GbE LAN, Wi-Fi, 3.5G/4G LTE module or other fieldbus devices. With the provided features, NET 200-ECM is an ideal controller for your EtherCAT control system.


You can place an order for the Nexcom NET 200-ECM EtherCAT Motion Controller, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Support Onboard Intel® Celeron® processor J1900 Quad Cord 2.0GHz
Main Memory 4GB RAM (2 x DDR3L)
Display Option Dual independent display, - DVI-I and DP
Storage Device 1 x 2.5" SSD/HDD(SATA 2.0) --front accessible, 1 x SD card (Data storage only), 1 x mSATA
Expansion Slot 2 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE/Fieldbus modules
Pre-Installed Software Package Operating system: Windows Embedded Standard 7, Real-time extension: , - RTX2012/RTX2016 for 32-bit OS, - RTX2014/RTX64 3.0 for 64-bit OS, EtherCAT Master: NexECM, EtherCAT configurator
EtherCAT Support Table Basic Features, - Service Commands: Support of all commands, NexECMRtx, - IRQ Field in Datagram: Use IRQ information from Slave in datagram header, NexECMRtx, - Slaves with Device Emulation: Support Slaves with and without application controller, NexECMRtx, - EtherCAT State Machine: Support of ESM special behavior, NexECMRtx, - Error Handling: Checking of network or slave errors, e.g. working counter, NexECMRtx, Process Data Exchange, - Cyclic PDO: Cyclic process data exchange, Network Configuration, - Reading ENI: Network configuration taken from ENI file, NexECMRtx, - Compare Network: Configuration Compare configured and existing network configuration during boot-up, NexECMRtx, - Explicit Device Identification: Identification used for hot connect and prevention against cable swapping, NexECMRtx, - Station Alias Addressing: Support configured station alias in slave, i.e. enable 2nd Address and use it, NexECMRtx, - Access to EEPROM: Support routines to access EEPROM via ESC register, NexECMRtx, Mailbox Support, - Support Mailbox: Main functionality for mailbox transfer, NexECMRtx, - Mailbox polling: Polling mailbox state in slaves, NexECMRtx, CAN Application Layer Over EtherCAT (CoE), - SDO Up/Download: Normal and expedited transfer, NexECMRtx, - Complete Access: Transfer the entire object (with all sub-indices) at once, NexECMRtx, Distributed Clocks, - DC: Support of distributed clock, NexECMRtx
EtherCAT Master Slave module no.: up to 64, Cycle time: up to 250μs, Synchronization Error: +/-50ns, Support CiA 402 standard protocol
Interface
I/O Interface-Front ATX power on/off switch, LEDs for HDD LED, Batty LEDs, Power LED, COM port TX/RX, 5x programmable GPO LEDs, 1 x External SD Card, 1 x SIM card holder, 1 x EtherCAT port, 1 x Intel® I210IT GbE LAN port, 1 x DP display output, 1 x DVI-I display output, 1 x USB 3.0 (900mA per each), 3 x USB 2.0 (500mA per each), 2 x RS232/422/485 support auto flow control, - Jumper-free setting on RS232/422/485, - Support 2.5KV isolation protection on COM1, 1 x 3-pic DC input, Typical 24V DC input with +/-20% range
Power Requirements
Power Requirements Typical 24V DC input with +/-20% range, 1 x optional 24V, 60W power adapter
Physical Characteristics
Operating temperature Ambient with air flow: -5°C to 55°C (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
Storage Temperature -20°C to 80°C
Dimensions 85mm (W) x 157mm (D) x 214mm (H)
Housing Aluminum and metal chassis with fanless design
Humidity 10% to 95% (non-condensing)
Shock protection - SSD: 20G, half sine, 11ms, IEC60068-2-27, - CFast: 50G, half sine, 11ms, IEC60068-2-27
Standards and Certifications CE, FCC Class A
Vibration Protection - Random: 2Grms @ 5 ~ 500Hz, IEC60068-2-64, - Sinusoidal: 2Grms @ 5 ~ 500Hz, IEC60068-2-6

related products