Nexcom MVS 2623-C8SK Mobile NVR
- Modular design for flexible I/O expansion
- Three SIM cards + dual WWAN modules support
- 8 x 10/100/1000 Mbps 802.3af PoE ports
- Built-in u-blox NEO-M8N module, optional Dead Reckoning support
- Intel Atom® x7, 4c, 2.0GHz E3950
- Dual removable SATA 3.0 SSD/HDD
- iButton for driver ID identification
- Built-in CAN 2.0B. Optional OBDII function
Description
MVS 2623-C8SK 8-CH PoE Mobile NVR increases safety and security for bus passenger transportation with high video resolution and 2 extensive removable storage HDD/SSD capacity. It connects up to 8 IP cameras + PoE function providing reliable and high-quality video coverage around the bus.
MVS 2623-C8SK is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for various applications.
MVS 2623-C8SK leverages wireless networks to simplify fleet management with remote, real-time video monitoring capabilities. This remote capability keeps transit fleets in service around the clock.
Vehicle data integration and diagnostics are also carried out via CAN Bus and OBDII. MIL-STD-810G for shock and vibration is designed to operate in harsh environments. Optional internal backup battery guards against any unexpected vehicle power failure or unstable vehicle power.
You can place an order for the Nexcom MVS 2623-C8SK Mobile NVR, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| General | |
|---|---|
| CPU | Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) |
| Memory | 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, default 2GB industrial grade memory |
| Storage Device | 2 x 2.5” SATA 3.0 SSD/HDD, removable & hot swappable (optional lockable storage available) |
| Expansion | 1 x full size mini-PCIe socket (USB 2.0), 1 x full size mini-PCIe socket (USB 2.0 + PCIe), 1 x half size mini-PCIe socket (USB 2.0 + PCIe) |
| GNSS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou, Optional modules with Dead Reckoning available, Built-in G-sensor |
| Rechargeable Battery (option) | Lithium-ion Polymer, Nominal capacity 1100mAh, Maximum charge current 1.0CmA |
| Ethernet | 8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W |
| Interface | |
| I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health, 1 x Reset button, 1 x USB type A USB 2.0 port, 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out, 1 x externally accessible SIM card sockets, 2 x antenna holes for WWAN/WLAN/BT/GPS |
| I/O Interface-Rear | 8 x RJ45 10/100/1000 Mbps PoE ports with LED, 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED, 1 x 9~36VDC input with ignition and 40W typical power consumption, 2 x USB type A USB 3.0 port, 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out, 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, 1 x HDMI port, resolution up to 2560 x 1600 @60Hz, 2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable), 1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button, 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton, 1 x 16-pin terminal block connector, - 1 x CAN Bus 2.0B (on board), - 1 x OBDII from optional VIOB-CAN-03 module (SAE J1939), - 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module, - 8 x programmable GPIO, (4 x Digital inputs in default), Input voltage (source type): 5VDC TTL (default), Input voltage (external type): 3 ~ 12VDC, (4 x Digital outputs in default), Digital output (source type): 5VDC TTL (default), max current: 20mA, Digital output (external type): 3 ~ 24VDC, max current: 150mA, 1 x externally acessible SIM card socket and 1x internal SIM card socket selectable |
| Power Requirement | |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
| Physical Characteristics | |
| Dimensions | 260mm (W) x 196mm (D) x 79.6mm (H) (10.24” x 7.72” x 3.13”) |
| Operating temperatures | -30°C~70°C (w/ industrial SSD) with air flow |
| Storage temperatures | -40°C~80°C |
| Humidity | 10% to 90% (non-condensing) |
| Standards/Certifications | CE approval, FCC Class A, E13 Mark |
| Weight | 4kg |
| Environment | Vibration (random): 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock |
| Compatible Operating Systems | |
| Operating System | Windows 10 64-bit only, Linux YOCTO |
| Security | |
| Security | TPM in option |
