Easy World Automation | Nexcom MVS 2620-IP In-Vehicle Box Computer

Nexcom MVS 2620-IP In-Vehicle Box Computer

  • IP65-rated Rugged Design
  • Intel Atom® x7, 4c, 2.0GHz E3950 (Apollo-lake)
  • 9~36VDC with Ignition Control
  • Built-in GPS with optional Dead Reckoning
  • Up to two WLAN or two 3G/LTE via 4 mini-PCIe slots
  • Electrical Isolation for CAN2.0B & GPI/O
  • Optional OBD function (SAE J1939/J1708)
  • Rich and various GbE, USB2.0, Serial I/O and Storages
  • Compliant with E-mark and ISO 7637-2
  • Compliant with MIL-STD-810G in Vibration/Shock

  • Brand: NEXCOM
  • Product Code: MVS 2620-IP

Description

MVS 2620-IP, an IP65-rated rugged enclosure, and maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy-duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments.

MVS 2620-IP is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions quickly tailored to a vast number of applications. Inside the system, there’re four mini-PCIe slots with three SIM card slots offering WLAN, 3G/LTE, CAN OBD (SAE J1708/J1939), or CVBS functionality. Besides, it can operate at temperatures from -30°C to +70°C under fanless.

MVS 2620-IP supports 9~36VDC power input with ignition management and 12VDC at 2A maximum power output. It is compliant to the E-mark and ISO 7637-2 in vehicle certificate and meets US military MIL-STD-810G, category 4, composite wheeled vehicle, for vibration and shock criteria.


You can place an order for the Nexcom MVS 2620-IP In-Vehicle Box Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake)
Memory 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 2GB industrial grade memory in default
Storage Device 1 x 2.5" SATA 3.0 SSD/HDD, 1 x CFast (externally acessible)
GPS and On Board Sensor 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou, Optional modules with Dead Reckoning available, Built-in G-sensor
Ethernet 2-port 10/100/1000 Mbps, Controller: Intel® 1210-T1
Interface
I/O Interface-Front 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health, 1 x USB type A USB 2.0 port (w/ lid), 1 x SIM slot (w/ lid), 1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector, 3 x antenna holes for WWAN/GPS, One expansion port (M12-type) reserved
I/O Interface-Rear Circular 22-pin: - 3x RS-232 (two for full, RI/5V/12V selectable), M12 8-pin: - 1 x GbE, M12 8-pin: - 2 x USB 2.0, M12 12-pin: - 3-bit GPO & 3-bit GPI , - iButton, M12 12-pin: - 1 x Line-out , - DC12V-out, 2A max., - OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939), - 2 x CAN Bus 2.0B from optional VIOB-CAN-04 module, Circular 31-pin: - 1 x VGA, resolution up to 2560 x 1600 @60Hz, - 1 x GbE , - 2 x RS-485 (2-wire) , - 1 x CAN 2.0B w/ isolation, 6-bit DIP switch (w/ lid), 3 x Digital inputs, - Source-type: 9~36V-in (default), -Eexternal-type: 0~33VDC pull-high , -Isolation, 3 x Digital outputs, - Source-type: 9~36V-in (norminal 35mA@24V) (default), - External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C), - Isolation, Source or external selected by 6-bit DIP Switch, 1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable, 4 x antenna holes for WLAN/WWAN, 1 x M12 S-code for 9~36VDC-IN
Power Requirement
Power Management Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode
Physical Characteristics
Dimensions 260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97")
Operating temperatures -30°C~70°C (w/ industrial SSD) with air flow
Storage temperatures -40°C~80°C
Humidity 10% to 90% (non-condensing)
Standards/Certifications CE approval, FCC Class A, E13
Weight 2.88kg
Environment Vibration (random): - 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD), Operating: MIL-STD-810G, 514.6C, Category 4, Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock
Compatible Operating Systems
Operating System Windows 10 64-bit only, Linux YOCTO
Security
Security TPM in option