MOXA CSM-400-1225-T slide-in Ethernet-to-Fiber Media Converter | Easy World Automation

MOXA CSM-400-1225-T slide-in Ethernet-to-Fiber Media Converter

  • 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) WDM-B single-mode port with SC connector
  • 12 VDC input power
  • -40 to 75°C operating temperature
  • LFP (Link Fault Pass-Through) and FEF (Far End Fault)
  • Supports store-and-forward mode and pass-through mode
  • Auto-negotiation
  • Supports IEEE 802.3AH OAM protocol
  • Plug and play
  • Hot-swappable
  • IP-based remote management
  • Supports WDM type modules
  • Brand: MOXA
  • Product Code: CSM-400-1225-T

Description

The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors) and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.


You can also find the CSM-400-1225, CSM-400-1218-T, and CSM-400-1214-T models in the Industrial Media Converters.


Discover industrial automation solutions appropriated to your needs, and easily inquire about the MOXA CSM-400-1225-T slide-in Ethernet-to-Fiber Media Converter through our user-friendly website via one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh) and Oman). 

Specification

Interface
10/100Mb RJ45 (Megabit) Ports : 1 Port
10/100/1000Mb RJ45 (Gigabit) Ports
100Mb Fiber optic multi mode (Megabit) Ports
100Mb Fiber optic single mode (Megabit) Ports : 1 SC Port
1000Mb SFP Fiber optic (Gigabit) Ports
M12 port
Alert Output
Standards and protocols
Protocols and work standards IEEE 802.3u for 100BaseT(X) and 100BaseFX
General
Maximum cable length for data transfer 20Km with single mode fiber optic cable
MTBF 1,454,560 hrs
Power Requirements
Power consumed 220 mA @ 12 VDC
Type of power input -
Protection against overflow
LED Indicators
LNK/ACT
Physical Characteristics
Standards and Certifications EMC, EMI, EMS, Safety, Vibration
Housing -
Dimensions 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Weight 0.125kg
Operating Temperature -40 to 75°C
Storage Temperature -40 to 85°C (-40 to 185°F)
Operation Humidity 5 to 95% (non-condensing)
Installation -