MOXA CP-138E-A-I w/o Cable PCI Express Serial Board
- 8 x RS-422/485 Serial Ports
- 0 to 55°C Operating Temperature
- 2 kV Isolation
- With Out Cable
- PCI Express 1.0 compliant
- 921.6 kbps maximum baud rate for fast data transmission
- 128-byte FIFO and on-chip H/W, S/W flow control
- Low-profile form factor fits small-sized PCs
- Drivers provided for a broad selection of operating systems, including Windows, Linux, and UNIX
- Easy maintenance with built-in LEDs and management software
Description
The CP-118E-A-I and CP-138E-A-I are smart PCI Express
multiport serial boards designed for POS and ATM applications and used by
industrial automation system manufacturers and system integrators. The
CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems,
and each of their eight serial ports supports data rates of up to 921.6 kbps
and provides full modem control signals, ensuring compatibility with a wide
range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work
with PCI Express x1, allowing the boards to be installed in any PCI Express
slot.
Intelligent RS-485 for Easy Installation and Troubleshooting
Setting up an RS-485 network is relatively straightforward.
The challenge comes when the power is turned on and the devices connected to
the network start transmitting and receiving data. In most cases, engineers
must further tune the system by configuring pull high/low resistors and
terminators at strategic points along the network. Moxa’s Intelligent RS-485
technology supports two essential features to make it easy: (1) One-Click
Installation automatically analyzes the network topology and then adjusts
terminators and pulls high/low resistors. (2) One-click troubleshooting tells
you what to change to make a deficient network viable.
You can also find the CP-134EL-A-I w/o Cable model in the Multiport Serial Cards.
Easy World Automation offers the easiest way to buy the MOXA CP-138E-A-I w/o Cable PCI Express Serial Board in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman) at the
lowest price through online inquiring. Our sales experts will contact you to
fulfill all your industrial automation needs.
Specification
| SERIAL INTERFACE | |
|---|---|
| Comm. Controller | 16C550C compatible |
| Number of Ports | 8 |
| Bus interface | PCI Express 1.0 |
| Serial Standards | RS-422, RS-485 |
| Connector | DB78 female |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Stop Bits | 1, 1.5, 2 |
| Parity | Even, Odd, Space, Mark, None |
| Flow Control | XON/XOFF, None |
| Data Bits | 5, 6, 7, 8 |
| FIFO | 128 bytes |
| POWER REQUIREMENTS | |
| Power requirement | 2,356 mA @ 3.3 VDC |
| SERIAL SOFTWARE FEATURES | |
| Windows Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10/11 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64)/2022, Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Linux Drivers | Linux kernel 5.x, Linux kernel 4.x, Linux kernel 3.x, Linux kernel 2.6.x, Linux kernel 2.4.x |
| UNIX Drivers | Solaris 10, UnixWare 7, SCO OpenServer 5, SCO OpenServer 6 |
| GENERAL | |
| MTBF | 390,883 hrs, 221,331 hrs |
| PHYSICAL CHARACTERISTICS | |
| Dimensions | 107 x 136.9 mm (4.21 x 5.39 in) |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class B; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF; Green Product: RoHS, CRoHS, WEEE |
