MOXA CP-114UL-I-DB25M UPCI Serial Board
- 4 x RS-232/422/485 Serial Ports (DB44 female connector)
- 2KV Isolation protection for serial ports
- Supports maximum 921.6 kbps baud rate
- 128-byte FIFO and on-chip H/W, S/W flow control
- Compatible Driver with Windows, Linux, and UNIX
- Included Cable: CBL-M44M25x4-50
- 0 to 55°C Operating Temperature
Description
Moxa’s CP-114UL Series of multiport serial boards is
designed to be used by industrial automation system integrators for
long-distance, multi-point, PC-based data acquisition applications. On-chip
Automatic Data Direction Control for precision RS-485 communication requires
precise timing control to enable and disable the line driver. The Moxa Turbo
Serial Engine™ chip that powers the CP-114UL boards comes with on-chip ADDC®,
which makes RS-485 as easy to use as RS-232. In RS-485 mode, the serial port
can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km. For
long-distance RS-485 communication, 2 kV electrical isolation protections are
available to prevent equipment damage.
You can also find the CP-114UL-DB25M, CP-114UL-I-DB9M, and CP-114UL-T models in the Multiport Serial Cards.
You can explore our wide range of products and enquire about
the MOXA CP-114UL-I-DB25M UPCI Serial Board for your industrial automation needs. Our sales experts will pave the
way to buy at the lowest price in Dubai, UAE, Saudi Arabia, Oman, and the
Middle East.
Specification
| SERIAL INTERFACE | |
|---|---|
| Comm. Controller | MU860 (16C550C compatible) |
| Number of Ports | 4 |
| Bus interface | 32-bit Universal PCI |
| Serial Standards | RS-232, RS-422, RS-485 |
| Connector | DB44 female |
| Baudrate | 50 bps to 921.6 kbps |
| Max. No. of Boards per PC | 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | Even, Odd, Space, Mark, None |
| Flow Control | RTS/CTS, XON/XOFF, None |
| Data Bits | 5, 6, 7, 8 |
| FIFO | 128 bytes |
| Isolation | : 2 KV |
| SERIAL SIGNALS | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| SERIAL SOFTWARE FEATURES | |
| Windows Drivers | DOS, Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Linux Drivers | Linux kernel 2.4.x, Linux kernel 2.6.x, Linux kernel 3.x, Linux kernel 4.x, Linux kernel 5.x |
| UNIX Drivers | QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD |
| POWER REQUIREMENTS | |
| Input Current | 465 mA @ 5 VDC |
| Input Voltage | - |
| GENERAL | |
| MTBF | 114,223 hrs |
| LED Indicators | Built-in Tx, Rx LEDs for each port |
| PHYSICAL CHARACTERISTICS | |
| Dimensions | 64.4 x 130 mm (2.53 x 5.12 in) |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class B; EMS: IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8; Green Product: RoHS, CRoHS, WEEE; Telcordia SR332 |
