MOXA CP-112UL-I-DB9M UPCI Serial Board
- 2 x RS-232/422/485 Serial Ports (DB25 female connector)
- 2KV Isolation protection for serial ports
- Supports maximum 921.6 kbps baud rate
- 128-byte FIFO and on-chip H/W, S/W flow control
- Compatible Driver with Windows, Linux, and UNIX
- Included Cable: CBL-M25M9x2-50
- 0 to 55°C Operating Temperature
Description
Moxa’s CP-112UL Series of multiport serial boards are
designed to be used by industrial automation system integrators for
long-distance, multi-point, PC-based data acquisition applications. On-chip
Automatic Data Direction Control for precision RS-485 communication requires
precise timing control to enable and disable the line driver. Moxa’s Turbo
Serial Engine™ chip that powers the CP-112UL boards comes with on-chip ADDC®,
which makes RS-485 as easy to use as RS-232. The boards come with 2 RS-422/485
serial ports, both of which can achieve data rates up to 921.6 kbps. In RS-485
mode, the serial port can connect up to 31 daisy-chained RS-485 devices within
a range of 1.2 km. For long-distance RS-485 communication, 2 kV electrical
isolation protection is available to prevent equipment damage.
You can also find the CP-112UL-DB9M, CP-112UL-I-T, and CP-112UL-T models in the Multiport Serial Cards.
Discover industrial automation solutions appropriate to your
needs, and easily inquire about the MOXA CP-112UL-I-DB9M UPCI Serial Board through our user-friendly website via
one of our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and
Oman).
Specification
| SERIAL INTERFACE | |
|---|---|
| Comm. Controller | MU860 (16C550C compatible) |
| Number of Ports | 2 |
| Bus interface | 32-bit Universal PCI |
| Serial Standards | RS-232, RS-422, RS-485 |
| Connector | DB25 female |
| Baudrate | 50 bps to 921.6 kbps |
| Max. No. of Boards per PC | 8 |
| Stop Bits | - |
| Parity | Even, Odd, Space, Mark, None |
| Flow Control | RTS/CTS, XON/XOFF, None |
| Data Bits | 5, 6, 7, 8 |
| FIFO | 128 bytes |
| Isolation | : 2 KV |
| SERIAL SIGNALS | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| SERIAL SOFTWARE FEATURES | |
| Windows Drivers | DOS, Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Linux Drivers | Linux kernel 2.4.x, Linux kernel 2.6.x, Linux kernel 3.x, Linux kernel 4.x, Linux kernel 5.x |
| UNIX Drivers | QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD |
| POWER REQUIREMENTS | |
| Input Current | 290 mA @ 5 VDC |
| Input Voltage | - |
| GENERAL | |
| MTBF | 219,971 hrs |
| LED Indicators | Built-in Tx, Rx LEDs for each port |
| PHYSICAL CHARACTERISTICS | |
| Dimensions | 64.4 x 120 mm (2.53 x 4.72 in) |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operation Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications | EMC: EN 55032/35; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m; Green Product: RoHS, CRoHS, WEEE; Telcordia (Bellcore) Standard TR/SR |
