The JetWave 3200 series is an industrial 802.11n/ a/b/g Wireless AP which offers a high performance and reliability wireless solution for both 2.4G and 5G radio band. With the JetWave 3200 series wireless access point, a network designer will easily achieve the integration of wired and wireless networks. With the new generation 802.11n MIMO technology, the multi-radio offers a high data rate of up to 300Mbps per radio, provide flexible wireless backbone deployment options, and provide the redundant wireless connections to increase the reliability of the entire wireless network. The JetWave 3200-M12 series equips with dual Gigabit Ethernet M12 anti-vibration connector for vehicle installation.
The JetWave 3200 series can function as an AP/CPE, WDS modes for different point to point or point to multiple point network applications. The additional Routing mode allows to separate the LAN and WLAN to different IP subnet and perform NAT routing. The advanced features include LAN to WLAN Link Fault Pass-Through, Dual Radio Bridging, and Redundancy, high-speed gigabit Ethernet transmission, Wireless QoS (WMM), and complete wireless security and packet encryption.
The JetWave 3200 series is an industrial-grade design with the significant features of gigabit PoE+, dual 24V(12~48V)DC power input, IP31 Housing and Digital Input/Output. The design of the EN50121-4 approved and wide operation temperature design allows users to install the device under harsh environmental conditions.
You can place an order for the Beijer JetWave 3220-SR Dual radio industrial wireless AP-bridge online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
|10/100/1000BaseT(X) Ports||2x 10/100/1000Base-T RJ-45 (JetWave 3220)|
|Modulation Type||802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)|
|PoE Ports||: IEEE 802.3at PoE+ Complaint in Ethernet Port 1|
|Wireless Security||IEEE 802.11i|
|WLAN Operation Mode||System: Bridge or Router, Wireless: Wireless Access Point, Wireless Client WDS-AP, WDS-Client Redundant AP, Redundant Client for wireless redundancy (JetWave 3220/3220-M12)|
|WLAN Standards||IEEE 802.11a/b/g/n|
|Transmission Rates||IEEE 802.11a, g: 54 Mbps, IEEE 802.11n: 300Mbps @ 40MHz|
|Digital Inputs||1x Digital Input, 0: +3V max., 1: +11V~+30VDC|
|Console Port||3-pin Diag. socket for Diagnostic/CLI|
|Security||Multi-SSID (up to 8x ESSID for each radio)|
|Input Voltage||Dual 24V (12~48VDC) input|
|Power Consumption||Max. 10 Watts @ DC 48V, depend on Radio TX power|
|Reverse Polarity Protection||-|
|Humidity||5% ~ 95% (operating)|
|EMC||CE EN55022/24, FCC part 15B Class A Railway|
|Weight (PACKAGED)||1.5 kg with package, without optional accessary|
|Housing||Industrial IP31 Aluminum|
|Installation||Din-Rail, Wall-Mount, Celling-Mount (Option Accessory)|
|Standards and Certifications||Railway Roadside EN50121-4 EMC Certification, EN 300 328 V1.8.1, EN 301 893 V1.7.1, EN301 489-1/17(WIFI)|
|Operating Temperature||-40 ~70°C|
|Storage Temperature||-40 ~ 85°C|
|Management||Web GUI, Korenix View Utility, SNMP, NTP, IP Setup, DHCP Server/Client, Management VLAN, Configuration Backup/Restore, Reload Default|