Easy World Automation | Nexcom ICES 501X Computer-on-Module

Nexcom ICES 501X Computer-on-Module

  • Embedded Intel® Aton Bay-trail-I SOC chip with 4 core support
  • Embedded controller built in with EAPI support
  • Support DDR3L memory down 1066/1333MHz up to 4GBytes
  • Support onboard EMMC up to 8GBytes
  • Support 4PCIe x1(Optional Port 4 if LAN is disabled)/1x USB 3.0/7x USB 2.0/2x SATA 2.0 and GbE
  • 1x DP/ LVDS interfaces
  • Dimension 84x 55mm (W x L)

Description

The ICES 510X is a COM Express® Type 10 mini-size module that features Intel® Atom™ Quad-Core processor Bay-trail-I SOC solution. DDR3L Memory down chips 1066 / 1333MHz up to 4GB. The ICES 501X integrates with the Intel® Gen7 Graphic engine to support dual displays of LVDS resolution up to 1366 x 768 resolutions and 1DP link with HDMI1.4a / DP1.2 configurations. The high-performance ICES 501X COM Express module supports SATA, USB 2.0 & USB 3.0 / VGA / DP (HDMI) / PCI-E x 1.


You can place an order for the Nexcom ICES 501X Computer-on-Module, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
Form factor -
Expansion -
Graphic Interfaces -
Super I/O -
I/O Interface -
Network -
Audio HD audio interface
EEPROM -
Watchdog Timer -
On-board RTC -
CPU Support Intel® Atom™ quad core Bay-trail-I SOC up to 1.91GHz
Chipset -
Main Memory DDR3L memory down 1066/1333MHz memory up to 4GB
BIOS AMI system BIOS, Plug and play support, Advanced power management and advanced configuration & power interface support
Display Intel® HD graphics with DX9 support, One DP interfaces down to the carried board, LVDS 18/24 bit interface
On-board LAN Intel® I210 GbE controller, support boot from LAN, wake on LAN, Support PXE boot from LAN, wake on LAN function, Signals down to I/O board
COM Express Connector LVDS/HDA/2 x SATA/GbE/4PCIE x 1(Optional Port 4 if LAN is disabled) /7 x USB 2.0/1 x USB 3.0, LPC bus / GPIO / SMBus (I2C)/ SPI BIOS
Power Requirements
Power Input +12V, VCC5,VCC3, VCORE, 5VSB Voltage detection
physical characteristics
Dimensions 84mm (W) x 55mm (L)
Operating temperatures -40°C to 85°C
Storage temperature -40°C to 85°C
Relative humidity 10% to 90% (operating, non-condensing), -5% to 95% (non-operating, non-condensing)
Standards and Certifications Meet CE, FCC class B