Nexcom NEX 605 Mini-ITX MB
- Intel® Atom™ Dual-Core D2550 1.86GHz processor
- Intel® ICH10R to support software RAID 0/ 1/ 5/ 10
- Dual 204-pins DDR3 SO-DIMMs support max. 4GB SDRAM memory
- Support VGA/HDMI, VGA/LVDS or HDMI/LVDS dual displays
- 8x USB, 4x COM, 2x GbE (Intel), 1x eSATA/ 5x SATA, 1x LPT
- Audio Mic-in/ Line- out, (internal Line-in)
- 1x Mini-PCIe (1x full-size/ SIM tray), 1x PCIe x4
- Standard ATX v.2.0 input by AT/ ATX power mode
Description
NEX 605 is a Mini-ITX industrial MB embedded Intel® Atom™ D2550 1.86GHz dual-core processor, which integrated Intel® HD graphic controller SGX545 to support 640MHz/DX9. NEX 605 supports VGA, LVDS (1 x ch. 24-bit up to 1440 x 900 @ 60Hz), and HDMI (1080p) by dual displays interface as standard along with two DDR3 SO-DIMMs for max 4GB memory.
NEX 605 embedded Intel® ICH10R chipset to support Intel® Matrix Storage Technology up to six SATA 2.0 for RAID 0/1/5/10 (default 1 x SATA/ 5 x SATA, optional 2 x eSATA/4 x SATA) eight USB2.0 (extra 1 x USB2.0 to mPCIe interfaces), two Intel® 82574L Gigabit Ethernet controller, one Mini-PCIe full-size slot with SIM stray for standard add-on application and one more PCIex4 slot by add-on PCIe riser card for expansion. NEX 605 is featuring versatile displays, matrix storage devices of eSATA/SATA as RAID for mass storage, and riches I/O support for multimedia as well as the critical mission of industrial embedded applications.
You can place an order for the Nexcom NEX 605 Mini-ITX MB, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
General | |
---|---|
CPU Support | Intel® Atom™ processor D2550 1.86GHz CPU |
Main Memory | Dual 204-pin SO-DIMMs support DDR3 up to 4GB SDRAM 800/1066MHz |
Chipset | Intel® ICH10R |
Display | New 2-chips solution 32nm package Intel® Atom™ processor D2550 integrated 3D graphics engine SGX545, to support up to 640MHz/ DX9 and provides multi-options for high-resolution displays, Analog VGA interface: 1 x VGA by DB15 connector Resolution up to 1920 x 1200 75Hz, HDMI interface: 1 x HDMI connector Resolution up to 1920 x 1200, LVDS interface: Single (24-bit) LVDS, resolution up to 1440 x 900 @ 60Hz by DF13 20-pin LVDS, Inverter (LVDS panel backlight) interface: 1 x 7-pins CCFL for LCD panel backlight inverter, Audio : Realtek ALC886-GR High Definition codec, 1 x Mic-in/1 x Line-out by audio jack on edge I/O and 1 x Line-in by internal 4-pins header, Expansions : 1 x Mini-PCIe (1 x full-size/SIM tray); 1 x PCIex4 slot, I/O Interfaces : COM1, RS232 by DB-9 male on edge I/O COM2, 3, 4 support 3 x RS232 ports by 2 x 5-pins box header and dualJST 10pins wafer, 8 x USB2.0: Use 9 of 14 ports (ICH10R), 4 x ports by 2 x dual stack USB2.0 on edge I/O (port 0 ~ 3), 4 x ports by 2 x 5-pins header pitch 2.54mm (port 6 ~ 9), 1 x ports to Mini-PCIe slots (port 10), 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5V), Power LED and HDD active LED/reset/power on-off by 2 x 5-pins header, 2 x 4-pins fan connector (for CPU and system), On board Buzzer and SMBus 2.0 by 1 x 4-pins, IrDA by 1 x 5-pins header, 2 x 13-pins box header for legacy parallel port/LPT, 2 x 13-pins header for 6SATA/2GbE LEDs connector |
Watchdog Timer | Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C) |
Storage | Default 1 x eSATA by external edge I/O and internal 5 x SATA connectors support software RAID 0,1,5 and 10, Optional by DIP-SW1 setting to 2 x eSATA by external edge I/O and internal 4 x SATA support software RAID 0,1,5 and 10, 2 x 13-pins header for 6 x SATA/2 x LAN LEDs connector |
System Monitor | Monitoring of 4 voltages and 2 temperatures, 4 voltage (Vcore, +12V , +3.3V , 5V), 2 temperatures (CPU, System), 2 fans speed detection |
On-board RTC | On-chip RTC with battery backup, 1 x External Li-Ion battery |
General | |
BIOS | AMI BIOS, Plug & Play support, Advanced power management, Advanced configuration & power interface, 16M bits SPI ROM |
On-board LAN | 2 x Intel® 82574L PCI Express Gigabit Ethernet, Support boot from LAN (PXE), 2 x RJ45 with LEDs build-in 2 x dual stackable USB type A connectors on edge I/O |
Power Requirements | |
Power | Power requirement: ATX Input, jumper AT/ATX (default) mode, Onboard 2 x 12-pins standard ATX version 2.0 power connector |
Physical Characteristics | |
Dimensions | Mini-ITX form factor/170mm (L) x 170mm (W) (6.7"x 6.7") |
Operating temperature | -15°C to 60°C |
Storage temperature | -20°C to 85°C |
Relative humidity | operating 10% to 90%, non-condensing |
Standards and Certifications | CE approval, FCC Class A |