Beijer JetCon 2401 RS232/422/485 to fiber serial converter
- Full duplex peer-to-peer or half duplex ring connection
- Data rate up to 921.6 kbps
- 100 ST fiber *
- Auto baud rate and direction
- 15 kV ESD protection
- -20~70 °C **
- * [-s] single-mode 40 km
- * [-m] multi-mode 5 km
- ** [-w]-40~70 °C
Description
JetCon 2401 is a 1-port RS232/422/485 serial to fiber media
converter with extended fiber transmission. Single-mode and Multi-mode fiber
optic ports meet your needs for long-distance transmission up to 40KM. JetCon
2401 will automatically detect the data baud rate of the connected full-duplex the serial device, ranging from 300 to 921,600bps. By moving up the DIP switch,
JetCon 2401 supports an auto setting function without system power reset to
change the serial interface, fiber wiring architecture, and termination of receiver
and transmission line. Also, JetCon 2401 is specially designed for applications
requiring good immunity of EMI/EMS such as power substation, rail and traffic
control signification systems under severe electromagnetic interference and
wide temperature range.
JetCon 2401 can be easily wall mounted as well as be mounted directly on DIN rail. AC 24V(12~32V) or DC 24V(12~48V) is available for different operating environments. With IP 30 rigid aluminum case, CE/FCC regulatory approvals, and 5-year global warranty, JetCon 2401 is your reliable choice for hazardous applications.
You can place an order for the Beijer JetCon 2401 RS232/422/485 to fiber serial converter online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Converter specifications | |
|---|---|
| Data transfer speed | 300bps to 921.6Kbps |
| Maximum data transmission distance | multi mode : 5KM, single mode : 40KM |
| Minimum output power converter | multi mode : TX Power: -12dBm (Min) ~ -9dBm (Max), single mode : TX Power: -9dBm (Min) ~-8dBm (Max) |
| Sensitivity to receiving information | multi mode : -28dBm (Min), single mode : -27dBm (Min) |
| Wavelength | multi mode : 820nm, single mode : 1310nm |
| Power Requirements | |
| Maximum power consumption | 1.5Watts @ 24V(Maximum) |
| Power Consumption (Output Adapter) | - |
| Power Input Plugin ( Redundant ) | Dual modes for power input, AC 24V(12~32V)/ DC 24V(12~48V) |
| Standards and protocols | |
| Point-to-point topology | |
| Ring topology | |
| RS-232 Signals | TxD, RxD, Signal Ground |
| RS-422 Signals | TxD+, TxD-, RxD+, RxD-, Signal Ground |
| RS-485-2w Signals | TxD+, TxD-, RxD+, RxD-, Signal Ground |
| Interface | |
| 10/100Mb RJ45 (Megabit) Ports | |
| 100Mb Fiber optic single mode (Megabit) Ports | JetCon2401-S : 1 x 10/100Mb ST Fiber port |
| 10/100/1000Mb (Gigabit) POE Prots | |
| 100Mb Fiber optic multi mode (Megabit) Ports | JetCon2401-m : 1 x 10/100Mb ST Fiber port |
| 10/100/1000Mb RJ45 (Gigabit) Ports | |
| 1000Mb SFP Fiber optic (Gigabit) Ports | |
| 100Mb SFP Fiber optic (Megabit) Ports | |
| Number of 10/100Mb PoE port | |
| USB | |
| DSL | |
| Serial port | 1 x RS-232/RS-485/RS-422 |
| Other ports | |
| General | |
| Fan / Fanless | Fanless |
| MTBF | - |
| Require cable diameter | Multi-mode fiber: 50/125um or 62.5/125um, Single-mode fiber: 8/125um, 9/125um |
| Physical Characteristics | |
| Dimensions | 24.7mm(H) x 74mm (W) x 99mm (D) |
| Housing | IP-30 grade aluminum metal case |
| Installation | DIN-Rail mount or desktop |
| Isolation | |
| Operating Temperature | -20 ~70°C |
| Operation Humidity | 5% ~ 95% (non-condensing) |
| Protection against excessive consumption | - |
| Protection against reverse flow | |
| Standards and Certifications | EMI, EMS, Shock, Vibration, Free Fall |
| Storage Temperature | -40 ~ 80°C |
| Weight | 0.135kg without package |
| LED Indicators | |
| LED Per Port | |
| Power | |
| Package Checklist | |
| Hardware installation guide | |
| Power adapter | |
| Power cable | |
