Brand: PULS
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
..
$0.00
Ex Tax:$0.00
Brand: PULS
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
..
$0.00
Ex Tax:$0.00
Brand: PULS
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
..
$0.00
Ex Tax:$0.00
Brand: PULS
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
..
$0.00
Ex Tax:$0.00
Brand: PULS
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
..
$0.00
Ex Tax:$0.00
Brand: PULS
With the switch in the 230V position the power-supply unit operates at low and moderate loads at any input voltage
between 95 and 264 V AC (see ’Outp..
$0.00
Ex Tax:$0.00
Brand: PULS
To be fused with a 10A, B-type 'circuit-breaker' switch based on the usual thermomagn. overload sensing principle (used anyway to fuse the input lines..
$0.00
Ex Tax:$0.00
Brand: PULS
Inrush current limiting done with a fixed 15R resistor (not a thermistor)
which is bridged after the unit is running, so losses are minimised. That
..
$0.00
Ex Tax:$0.00
Brand: PULS
Inrush current limiting done with a fixed 15R resistor (not a thermistor)
which is bridged after the unit is running, so losses are minimised. That
..
$0.00
Ex Tax:$0.00
Brand: PULS
To achieve current sharing:
Plug jumper into pos. 'Output parallel use'. This alters the output
V/I characteristic to be 'softer' (25V at 0.4A, 24V ..
$0.00
Ex Tax:$0.00
Brand: PULS
To achieve current sharing:
Plug jumper into pos. 'Output parallel use'. This alters the output
V/I characteristic to be 'softer' (25V at 0.4A, 24V ..
$0.00
Ex Tax:$0.00
Brand: PULS
To be fused with a 16A, B-type 'circuit-breaker' switch based on the usual thermomagnetic overload sensing principle (used anyway to fuse the
input l..
$0.00
Ex Tax:$0.00
Brand: PULS
To be fused with a 16A, B-type 'circuit-breaker' switch based on the usual thermomagnetic overload sensing principle (used anyway to fuse the
input l..
$0.00
Ex Tax:$0.00
Brand: PULS
To be fused with a 16A, B-type 'circuit-breaker' switch based on the
usual thermomagnetic overload sensing principle (used anyway to fuse
the input ..
$0.00
Ex Tax:$0.00
Brand: PULS
Inrush current limiting done with a fixed 15R resistor (not a thermistor)
which is bridged after the unit is running, so losses are minimised. That
..
$0.00
Ex Tax:$0.00
Brand: PULS
Quasi-Wide-Range Input: With the switch in the 230V position the power-supply unit operates at low and moderate loads (up to 2 A) at any input voltage..
$0.00
Ex Tax:$0.00