Beijer ST-2414 Digital output module
- 4 digital outputs
- Negative logic (NPN)
- 12/24 VDC
- 0.5 A
- Diagnostic input
- Brand: BEIJER
- Product Code: ST-2414
The FnIO S series is a micro modular remote IO-system from Crevis, which contains a wide selection of digital and analog modules as well as special modules. Together with a selected bus/ node module, the system is easily combined to make standalone IO-nodes.
The IO-system, which has an IP20 enclosure, is installed on a standard 35 mm DIN rail. Stable communication between the modules in the node is guaranteed via a unique sliding contact system.
A standard IO module is only 12 mm in width, and when using 16 channel IO modules a complete node is made up of 64 IOs of only 90 mm in width.
The FnIO S series supports known bus systems such as Profibus DP/V1, CC-Link, CANopen, Modbus-TCP, Modbus-RS232, and Modbus-RS485.
You can place an order for the Beijer ST-2414 Digital output module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
|Current consumption||45 mA @ 5.0 VDC|
|I/O connector||Removable terminal block, cage clamp|
|Output type||Transistor negative logic|
|Output voltage range||28 VDC (11 - 28.8 V)|
|ON-stage voltage drop||0.3 VDC @ 25 °C|
|Output delay||OFF to ON: 0.3 ms, ON to OFF: 0.3 ms|
|Output current rating||0.5 A, 2.0 A common|
|Output protection||Output short-circuit protection|
|ON-state minimum current||1 mA|
|OFF-state leakage current||50 uA|
|Mechanical size||12 mm x 99 mm x 70 mm|
|Module weight||70 g|
|Mounting||35mm DIN rail|
|System indicators||4 green output state, 1 green/red Bus state|
|Operating temperature||-20° to + 55°C|
|Storage temperature||-40° to + 85°C|