Bridgewave Navigator ST
- Up to 2.75 Gbps per radio using two subcarriers without compression
- Single carrier or dual sub-carrier operation to efficiently increase capacity without adding more equipment
- QPSK to 4096QAM
- Ultra-wide bandwidth operation to 160MHz ANSI and 112MHz ETSI
- 1+0, 1+1 HSB, and 2+0 operation
- Space Diversity and Frequency Diversity are available
- Built-in Advanced Digital Pre-Distortion to drive higher transmission performance
- Customer replaceable diplexers to ease operational logistics and improve system flexibility
- The adaptable antenna interface option supports third-party antennas to ease migration and upgrade
- Header and payload compression to further increase capacity
- 2 x 10GbE Ethernet interfaces (optional)
- SyncE and IEEE1588v2
- AES256 encryption
- No-touch WiFi maintenance interface (optional)
- Time-based feature licensing is available
- Brand: BRIDGEWAVE
- Product Code: Navigator ST
Description
NAVIGATOR is a licensed microwave
system supporting the 6-42GHz frequency bands, and offering performance and
features far exceeding that of microwave radios manufactured using
off-the-shelf chipsets. Built on the company’s proprietary custom ASICs,
NAVIGATOR provides network operators with unprecedented flexibility to support
multiple configurations and applications, optimize networks for the highest
capacity and range, upgrade legacy networks, and speed up deployments, while
minimizing both upfront investment costs and the ongoing costs to maintain and
service networks.
NAVIGATOR has been designed from
the ground up to deliver performance and features unavailable in any microwave
radio until now, to both meet critical backhaul requirements and reduce costs.
These include the ability to combine dual subcarriers in each transceiver to
transport up to 2.75Gbps in the single transceiver radio and 5.5Gbps in the
dual transceiver radio; modulations up to 4096QAM with ultra-wide channel
bandwidths up to 112MHz (ETSI) and 160MHz (ANSI) to maximize capacity and
range; customer-replaceable diplexers to minimize product lead times and
inventory stocking costs; a dual 10GbE interface that enables a simple, single
fiber run to the radio; and an adaptable antenna interface that allows
operators to upgrade legacy networks with minimum investment and disruption.
NAVIGATOR ST can achieve capacities up to 1.5Gbps per radio using a single carrier, and 2.75Gbps using dual sub-carriers, without requiring any additional equipment. Both the NAVIGATOR ST and NAVIGATOR DT feature customer-replaceable diplexers that easily and inexpensively convert to different sub-bands, eliminating the costly need to spare radios in specific sub-bands.
You can place an order for the Bridgewave Navigator ST online via one of our
Middle East branches (Dubai/Oman/Saudi Arabia) and get it delivered at a low
cost at a specific time.
Specification
Interface | |
---|---|
Ethernet | 1 x 1G RJ45 (POE), 1 x 1G SFP or 1 x 1G RJ45 (POE), 2 x 1/2.5G SFP or 1 x 1G RJ45 (POE), 2 x 1/10G SFP+ |
Console | USB serial port WiFi for no-touch maintenance (optional) |
Ethernet | |
Max Packet Size | 16000 bytes (Jumbo Frame) |
Ethernet Timing and Synchronization | SyncE (G.8261), IEEE 1588V2 Transparent, Boundary, and Ordinary Clock support |
Ethernet Features | IPv6, IPv4 L2- 16K MAC Addresses 4096 VLAN (IEEE 802.1Q) with 1024 VLANs supported concurrently VLAN tag translation on ingress or egress Provider Bridging (IEEE 802.1ad, Q-in-Q) RSTP / MSTP |
Ethernet Compression | Interface Gap and Pre-Amble Suppression, Header Compression, Payload Compression |
QoS Packet Classification | DiffServ (RFC 2475) VLAN PRI (IEEE 802.1Q-2003) MAC PRI Port Priority Port Number, Protocol MPLS PRI |
QoS Packet Scheduling | Port – Weighted Round Robin (WRR) Logic Port (cluster) – Weighted Fair Queuing (WFQ) or Strict Priority (SP) Priority Queue – WFQ, Strict Priority 8 priority queues per logical port/queue |
QoS Congestion Avoidance | Two-rate / three color marking, WRED, Policing, Flow-Control (PAUSE packets, back-pressure) |
QoS Traffic Shaping | Configurable |
Encryption | AES256 |
Ethernet Protection | ITU-T G.8032 Ring |
OAM | ITU-T Y.1731, IEEE 802.1ag, 802.3ah, Radius, Syslog |
MEF Compliance | MEF9 Services Test Suite, MEF14 Traffic Management Test Suite |
General | |
Data Throughput Rate | Up to 2.75Gbps per radio using two sub-carriers without compression or 1.5Gbps per radio using a single carrier |
Configurations | 1+0, 2+0 ACAP/ACCP, 1+1 HSB, 1+0 SD, 1+0 FD |
Frequency Range | 6-42GHz |
Modulation | QPSK to 4096QAM |
Air Interface | Full Duplex FDD |
Channel Bandwidths per Carrier | 10-160MHz ANSI and 7-112MHz ETSI |
Diplexer | Customer replaceable |
Tx Power (diplexer output) | Up to 27dBm with Built-In Advanced Digital Pre-Distortion |
Physical Characteristics | |
Input Power Requirements | -48 VDC direct DC or PoE (-36 VDC to -60 VDC range) |
Weight | 6.1kg (13.4lbs) |
Dimensions | 22.6 cm x 22.1 cm x 11.6 cm (8.92” x 8.72” x 4.55”) |
Operating Temperature | -33°C to +55°C (-27°F to +131°F) per ETS 300 019-2-4 Class 4M5 |
Humidity | 5%-100% |
IP Rating | IP67 / All Weather |
Safety | IEC 60950-1, -22 |
Regulatory | US FCC Part 101, FCC Part 15B; ETSI EN 302 217 |