Description
The AIG-100 Series gateways are entry-level IIoT gateways that connect Modbus RTU/ASCII/TCP devices to cloud platforms and applications such as Azure, AWS, and MQTT. The AIG-100, as a Modbus master, can integrate existing Modbus devices with cloud platforms, effortlessly collecting and transmitting data to the Azure and AWS clouds. Moreover, the gateways also support the Modbus TCP slave mode, enabling simultaneous data transmission to a cloud platform and local SCADA system.
Effortless Extension of I/O and Serial Interfaces
As the number of field sites increases, additional I/O or serial interfaces are required to connect devices, such as sensors, meters, and inverters, to collect and process the large amount of data that is generated. A typical approach is to install remote I/O and device servers to extend the interfaces, but the configuration settings required can be a nightmare for most users. To provide a straightforward configuration process for interface extension, AIG-100 gateways have better integration and come with an intuitive wizard that can configure Moxa ioLogiks and UPorts with just a few clicks.
Built-in Ready-to-use Data Preprocessing Functions, No Coding Required
Energy Management Systems mainly collect energy data such as average power generation and energy efficiency. This data is then used to display on-site conditions, observe the energy trend, and optimize energy usage. Most edge systems require additional programming to process the data required by the energy management system. The AIG-100 can preprocess the edge data and directly send meaningful data to the energy management systems. The intuitive UI enables easy configuration of the IIoT gateway settings to collect and process data.
Secure Remote Access Reduces Maintenance Costs
The AIG-100 comes with powerful troubleshooting tools to diagnose issues with protocol statuses and capture and analyze traffic packets, enabling engineers to remotely identify the root cause of issues and quickly bring the operation back to normal. The tools also provide secure remote access to the AIG-100 to enable maintenance engineers to access it directly, saving a lot of time and effort and reducing downtime in energy management systems.
You
can Buy the MOXA AIG-101-T-AP Modbus Gateway via inquiring online at competitive prices in the Middle
East (UAE (Dubai), KSA (Al Khobar, Riyadh) and
Oman). Enjoy the cost-effective shipping options
at a specific time in your location.
Specification
| COMPUTER | |
|---|---|
| CPU | Armv7 Cortex-A8 1 GHz |
| DRAM | 1 GB DDR3 |
| Storage Slot | microSD slots x 1 SD 2.0 interface (SDHC/SDXC) |
| Operating System | - |
| Graphics Controller | - |
| COMPUTER INTERFACE | |
| Expansion Slots | - |
| TPM | - |
| CAN Ports | - |
| Digital Input/Output Channels | - |
| USB | 1 x USB 2.0 host, type-A connectors |
| Wi-Fi Antenna | - |
| Cellular Antenna | SMA x 2 |
| GPS Antenna | SMA x 1 |
| SIM Slot | 2 Nano slots |
| Buttons | - |
| ETHERNET INTERFACE | |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Ethernet Ports | 2 x 10/100BaseT(X) Ports (RJ45 connector), Auto MDI/MDI-X connection |
| SERIAL INTERFACE | |
| Number of Ports | 2 x RS-232/422/485 Ports (DB9 male connector) |
| Console Port | - |
| Baudrate | 300 bps to 921.6 kbps |
| Data Bits | 7, 8 |
| Flow Control | RTS/CTS |
| Parity | None, Even, Odd, Space, Mark |
| Isolation | |
| Stop Bits | 1, 2 |
| Serial Signals | RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND), RS-422 (Tx+, Tx-, Rx+, Rx-, GND), RS-485-2w (Data+, Data-, GND), RS-485-4w (Tx+, Tx-, Rx+, Rx-, GND) |
| INDUSTRIAL PROTOCLS | |
| Protocols | Ethernet: Modbus TCP Client (Master) / Server (Slave), Generic MQTT, Azure IoT Device, AWS IoT Core; Serial: Modbus RTU/ASCII Master; Azure: MQTT, MQTT over WebSockets, AMQP, AMQP over WebSockets; |
| CELLULAR INTERFACE | |
| Cellular Standards | LTE Cat. 1 |
| Band Options (US) | - |
| Band Options (EU) | - |
| Band Option (APAC) | LTE Bands: Band 1 (2100 MHz) / Band 3 (1800 MHz) / Band 5 (850 MHz) / Band 8 (900 MHz) / Band 28 (700 MHz) UMTS Bands: Band 1 (2100 MHz) / Band 5 (850 MHz) / Band 8 (900 MHz) |
| GPS INTERFACE | |
| Receiver Types | - |
| Accuracy | - |
| Acquisition | - |
| Sensitivity | - |
| LED INDICATORS | |
| LAN | - |
| System | - |
| Serial | - |
| Wireless Signal Strength | - |
| POWER PARAMETERS | |
| Input Voltage | 9 to 36 VDC |
| Power Consumption | 8 W (max.) |
| Input Current | - |
| Power Connector | Screw-fastened Euroblock terminal |
| PHYSICAL CHARACTERISTICS | |
| Housing | Metal |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Dimensions | 128.5 x 89.1 x 41 mm (5.06 x 3.51 x 1.61 in) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Weight | 512 g (1.13 lb) |
| MTBF | 566,458 hrs |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Safety: IEC 62368-1, UL 62368-1, EN 62368-1; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-64, 5 Grms @ 5 to 500 Hz, random wave, 1 hr per axis (without USB devices attached); Cellular Standards: EN 303 413 (GPS), EN 301 908-1 (WCDMA/LTE), EN 301 908-2/-13 (WCDMA/LTE), EN 301 489-1/-19, EN 301 489-1/-52, EN 62311; Radio Frequency: FCC, PTCRB, RCM; Carrier Approvals: Verizon, AT&T; Green Product: RoHS, CRoHS, WEEE; Telcordia SR332 |
