Easy World Automation | Nexcom MVS 5600 In-Vehicle Computer

Nexcom MVS 5600 In-Vehicle Computer

  • Modular design for flexible I/O expansion
  • Three SIM cards + dual WWAN modules support
  • Wake on RTC/SMS via WWAN module
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Intel® Core™ dual-core i7-6600U/i3-6100U
  • Voice communication via WWAN module
  • iButton for driver ID identification
  • Built-in CAN 2.0B. Optional OBDII function

Description

MVS5600, based on 6th generation Intel® Core™ dual core i7-6600U 2.6GHz and i3-6100U 2.3GHz, is specifically designed for the harsh in-vehicle environment. It allows MVS 5600 to comply with stringent MIL-STD-810G military standards in the rugged, fanless, and compact mechanism.

MVS 5600 is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for various applications. MVS 5600 leverages wireless networks to simplify fleet management with remote, real-time video monitoring capabilities. This remote capability keeps transit fleets in service around the clock. Vehicle data integration and diagnostics are also carried out via CAN Bus and OBDII.

With the iButton function, it is easy to perform driver identification management. Optional internal backup battery guards against any unexpected vehicle power failure or unstable vehicle power.


You can place an order for the Nexcom MVS 5600 In-Vehicle Computer, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
CPU 6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz
Memory 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory
Storage Device 1 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0, 1 supported (optional lockable storage available), 1 x CFast (externally accessible)
Expansion 1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket (USB 2.0 + PCIe), 1 x half size Mini-PCIe socket (USB 2.0 + PCIe)
GPS and On Board Sensor 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou, Optional modules with Dead Reckoning available, Built-in G-sensor, Built-in TPM
Interface
I/O Interface-Front 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health, 1 x CFast socket with cover, 1 x Reset button, 2 x USB type A USB 3.0 port, 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out, 2 x externally accessible SIM card sockets (selectable), 2 x antenna holes for WWAN/WLAN/BT/GPS
I/O Interface-Rear 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED, 1 x 9~36VDC input with ignition and 34W typical power consumption, 2 x USB type A USB 3.0 port, 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out, 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, 1 x HDMI port, resolution up to 2560 x 1600 @60Hz, 2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable), 1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button, 1 x 16-pin terminal block connector, - 1 x CAN Bus 2.0B (on board), - 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939), - 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module, - 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton, - 8 x programmable GPIO, (4 x Digital inputs, w/ optional 3KV isolation protection), Input voltage (internal type): 5VDC TTL (default), Input voltage (source type): 3 ~24VDC, (4 x Digital outputs, w/ optional 3KV isolation protection), Digital output (sink type): 5VDC TTL (default), max current: 20mA, Digital output (source type): 3 ~ 24VDC, max current: 150mA
Power Requirement
Power Management Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode, Optional internal 1100mAh, Li-Polymer rechargeable battery
Physical Characteristics
Dimensions 260mm (W) x 196mm (D) x 66.5mm (H) (10.24" x 7.72" x 2.62")
Operating temperatures -30°C~60°C (w/ industrial SSD) with air flow
Storage temperatures -40°C~80°C
Humidity 10% to 90% (non-condensing)
Standards/Certifications CE approval, FCC Class A, E13 Mark
Weight 2.1kg
Environment Vibration (random): 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD), Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test, Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g, Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock
Compatible Operating Systems
Operating System Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X