.png)
Description
Tsunami Quickbridge® 826 series is an incredibly
cost-effective, non-Line-of-Sight Point-to-Point (PtP) wireless backhaul
solution. With this complete “Hop-in-a-Box” solution delivering up to 100 Mbps
throughput, deployments of all sizes will enjoy a quick return on investment.
With excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video, and data applications, Tsunami Quickbridge® 826 series satisfies carriers, wireless service providers, and Government organizations with requirements for reliable cost-optimized high-performance wireless backhaul operating in the 5.900 – 6.425 GHz band.
You can place an order for the Proxim Tsunami QB-826-LNK-100 Point-to-Point Radio, which is applicable in the Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Interfaces | |
|---|---|
| Wired Ethernet | One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in |
| Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
| Radio Specifications | |
| MIMO | 2x2 MIMO |
| Modulation | OFDM with BPSK, QPSK, QAM16, QAM64 |
| Frequency | 5.900 – 6.425 GHz (Subject to Country Regulations) |
| Channel Size | 40 MHz, 20 MHz, 10 MHz, 5 MHz channel bandwidths |
| Data Rate | MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection |
| TX Power | Up to 25 dBm (dual chain) |
| TX Power Control | 0 – 20 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit |
| Other | Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support |
| Antenna | |
| Antenna Type | Integrated 15 dBi dual Polarized (H+V) panel antenna |
| Management | |
| Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
| SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
| Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
| Security | |
| Encryption | AES-CCM 128 bits |
| Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| Network | |
| Modes | Bridging, Routing (RIP v2 and IP tunneling) |
| IP Stack | IPv4 and IPv6 simultaneously |
| Throughput Capacity | Up to 100 Mbps |
| Gateway Features | DHCP Server & relay, NAT with Std ALGs |
| VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| Power Requirement | |
| Power Consumption | 6 Watt typical (15 Watt max) |
| Physical Characteristics | |
| Temperature | OPERATING TEMPERATURE -40º to 55ºC (-40º to 131º Fahrenheit), STORAGE TEMPERATURE -55º to 70ºC (-67º to 158º Fahrenheit) |
| Humidity | Max 100% relative humidity (non-condensing) |
| IP Rating | IP67 |
| Dimensions Packaged | 13.97 x8.86 x 6.92 in (355 x 225 x 176 mm) |
| Dimensions Unpackaged | 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) – Each End Point |
| Weight (PACKAGED) | 9.8 lbs (4.45 Kg) |
| Weight (UNPACKAGED) | 2.1 lbs (0.950 kg) – Each end point |
| Safety | UL 60950-1/22 |
| Wind Loading | 180 km/h (112 mph) |
| General | |
| MTBF | 200,000 hours |
| Package Checklist | |
| Package Contents | One Tsunami® QB-826-LNK-100 with integrated antenna (Two Tsunami® QB-826-EPR-100 ), Two 20 W power injector and country specific power cord, Two basic Pole mounting kit, Two Connector weatherproofing kit (Includes all recommended weatherproofing material), Two Grounding kit, Two Quick Installation Guide |
