Description
The Tsunami® MP-10100S is an extremely secure version of the
Tsunami® MP-10100, a very high throughput, high power, especially reliable and
cost-effective, near-line-of-sight point-to-multipoint wireless solution.
The Tsunami® MP-10100S supports the following features that make it ideal for video surveillance, Government or mobility applications that need ultra-secure very high-speed broadband wireless access.
You can place an order for the Proxim Tsunami MP-10100S-BSU-US Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Interfaces | |
---|---|
Wired Ethernet | Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
Antenna | |
Antenna Type | Two N-type Connectors with built-in Surge Protection |
Radio Specifications | |
TX Power | Up to 28 dBm (dual chain) |
MIMO | 2x2:2 |
Modulation | OFDM with BPSK, QPSK, QAM16, QAM64, QAM256 |
Frequency | 4.900 – 5.925 GHz (Subject to Country Regulations) |
Channel Size | 80 MHz, 40 MHz and 20 MHz |
Data Rate | MCS 0 to 9 with Dynamic Data Rate Selection |
TX Power Control | 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature , Automatic Transmit Power Control (ATPC) with EIRP limit support |
Management | |
Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Standards and Protocols | |
Synchronization | Pass-through IEEE 1588v2 Ethernet Synchronization |
Security | |
Encryption | AES 128 and AES 256 |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Network | |
Modes | Bridging, Routing (RIP v2 and IP tunneling) |
IP Stack | IPv4 and IPv6 simultaneously |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Power requirements | |
Power Input | 36 to 57 VDC via Ethernet port1 (Power over Ethernet), 12 VDC via Access port, Power should not be provided simultaneously on both ports |
Power Output | 48 to 57 VDC – 25 Watt on Ethernet port2 (PoE – software controlled), 12 VDC on Access port |
Power Consumption | 17 Watt typical |
Physical characteristics | |
Safety | UL 60950, IEC 60950 (part -1 and -22) |
Temperature | OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit) |
Humidity | 100% relative humidity |
IP Rating | IP67 |
Dimensions Packaged | 14.56 x 13.0 x 7.87 in (370 x 331 x 200 mm) |
Dimensions Unpackaged | 9.84 x 8.66 x 2.83 in (250 x 220 x 72 mm) |
Weight (PACKAGED) | 9.92 lbs (4.5 kg) |
Weight (UNPACKAGED) | 4.20 lbs (1.9 kg) |
Standards and Certifications | USA: FCC 90Y + 15E (UNII 15.247), Railway: EN 50155 + EN 50121 + EN 61000-6-4 + EN 61373 + EN 45545-2 |
Wind Loading | 200 km/h (125 mph) |
Package Checklist | |
Package Contents | One Tsunami® MP-10100S-BSU/SUA with two N-type surge protected connectors Or One Tsunami® MP-10150S-BS9/SUR with integrated dual polarized antenna, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit, One Antenna alignment (RJ11) dongle, One Grounding kit, One Quick Installation Guide |
General | |
MTBF | 250 000 hours |