.png)
Description
The compact and robust form factor of the Tsunami® Multipoint 820 series is an ideal solution for urban wireless deployments. It is eminently suitable for discrete mounting in city streets and offers high reliability for the connection of Video Surveillance, traffic monitoring, and traffic light management systems.
The Tsunami® Multipoint 820 series is also adapted for in-vehicle mounting and supports transparent roaming for data on the move.
You can place an order for the Proxim Tsunami MP-825-CPE-100 Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
| Interfaces | |
|---|---|
| Wired Ethernet | One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in |
| Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) or WORP sync |
| Antenna | |
| Antenna Type | Integrated 15 dBi dual Polarized (H+V) panel antenna (12 dBi before 5.000 GHz and 14 dBi beyond 5.850 GHz) |
| Radio Specifications | |
| TX Power | Up to 26 dBm (dual chain) |
| MIMO | 2x2 MIMO |
| Modulation | OFDM with BPSK, QPSK, QAM16, QAM64 |
| Frequency | 4.900 - 5.925 GHz (Subject to Country Regulations) |
| Channel Size | 40 MHz, 20 MHz, 10 MHz*, 5 MHz* channel bandwidths |
| Data Rate | MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection, BPSK, QPSK, 16-QAM and 64-QAM for legacy mode (6Mbps - 54Mbps) |
| Throughput | Up to 100 Mbps |
| TX Power Control | 0 – 15 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit |
| Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support |
| Management | |
| Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
| SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
| Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
| Security | |
| Encryption | AES-CCM 128 bits |
| Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| Network | |
| Modes | Bridging, Routing (RIP v2 and IP tunneling) |
| Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
| VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| Power requirements | |
| Power Consumption | 6 Watt typical (15 Watt max) |
| Physical characteristics | |
| Safety | UL 60950-1/22 |
| Temperature | OPERATING -40º to 55ºC (-40º to 131º Fahrenheit) , STORAGE -55º to 70ºC (-67º to 158º Fahrenheit) |
| Humidity | Max 100% relative humidity (non-condensing) |
| IP Rating | IP67 |
| Dimensions Packaged | 13.97 x 8.86 x 3.46 in (355 x 225 x 88 mm) |
| Dimensions Unpackaged | 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) |
| Weight (PACKAGED) | 4.9 lbs (2.225 Kg) |
| Weight (UNPACKAGED) | 2.1 lbs (0.950 kg) |
| Wind Loading | 180 km/h (112 mph) |
| Package Checklist | |
| Package Contents | One Tsunami® MP-825-CPE-50 with integrated antenna Or One Tsunami® MP-825-CPE-100 with integrated antenna, One 20 W power injector and country specific power cord, One basic Pole mounting kit, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Grounding kit, One Quick Installation Guide |
| General | |
| MTBF | 350,000 hours |
