Contact Form
- Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data)
- Integrated 2x2 MIMO 16dBi Dual Polarized 90-degree Sector Antenna
- 2x2:2 MIMO
- IP67
- Brand: PROXIM
- Model: Tsunami MP-8260-BS9-WD
-
Operating Temperature (-40 to 60°C)
-
Relative Humidity (100% relative humidity)
-
IP protection (IP67)
-
Railway Transportation
The Tsunami® MP-8260 series is the latest in our range of
6.4 GHz point-to-multipoint products. They support a data rate that delivers up
to 300 Mbps over a 40 MHz channel. Designed specifically to work with the
MP-826-CPE and MP-826-CPA products, the Tsunami® MP-8260 benefits from all
features of the latest Tsunami® MultiPoint products but with the benefit of
operating in the 6.4 GHz band.
The Tsunami® MP-8260 Base Stations combined with the
MP-826-CPE is an ideal solution for large-scale wireless deployments and
provide an excellent value proposition to WISPs planning wireless broadband
last-mile access deployments.
This platform also features carrier-grade prioritization the platform supports multiple service classes and is able to prioritize voice, video, and data applications to enable granular management of customer service features.
You can place an order for the Proxim Tsunami MP-8260-BS9-WD Point-to-multiPoint Radio, which is applicable in the Railway Transportation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
| Point-to-Multipoint Radio : Interfaces | |
| Wired Ethernet | Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) |
| Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
| Point-to-Multipoint Radio : Antenna | |
| Antenna Type | Integrated 2x2 MIMO 16dBi Dual Polarized 90 degree Sector Antenna |
| Point-to-Multipoint Radio : Radio Specifications | |
| TX Power | Up to 25 dBm (dual chain) |
| MIMO | 2x2:2 |
| Modulation | OFDM with BPSK, QPSK, QAM16, QAM64 |
| Frequency | 5.900 – 6.425 GHz (Subject to Country Regulations) |
| Channel Size | 40 MHz, 20 MHz, 10 MHz, 5 MHz |
| Data Rate | MCS 0 to 9 with Dynamic Data Rate Selection |
| TX Power Control | 0 - 22 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
| Other | Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support |
| Point-to-Multipoint Radio : Management | |
| Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
| SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
| Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
| Point-to-Multipoint Radio : Standards and Protocols | |
| Synchronization | Pass-through IEEE 1588v2 Ethernet Synchronization |
| Point-to-Multipoint Radio : Security | |
| Encryption | AES 128 |
| Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| Point-to-Multipoint Radio : Network | |
| Modes | Bridging, Routing (RIP v2 and IP tunneling) |
| IP Stack | IPv4 and IPv6 simultaneously |
| Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
| VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| Point-to-Multipoint Radio : Power requirements | |
| Power Input | 36 to 57 VDC via Ethernet port1 (Power over Ethernet), 12 VDC via Access port, Power should not be provided simultaneously on both ports |
| Power Output | 48 to 57 VDC – 25 Watt on Ethernet port2 (PoE – software controlled), 12 VDC on Access port |
| Power Consumption | 18 Watt typical |
| Point-to-Multipoint Radio : Physical characteristics | |
| Safety | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
| Temperature | OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit) |
| Humidity | 100% relative humidity |
| IP Rating | IP67 |
| Dimensions Packaged | 18.46 x 7.05 x 21.57 in (469 x 179 x 548 mm) |
| Dimensions Unpackaged | 14.57 x 14.57 x 4.21 in (370 x 370 x 107 mm) |
| Weight (PACKAGED) | 13.67 lbs (6.2 kg) |
| Weight (UNPACKAGED) | 7.27 lbs (3.3 kg) |
| Wind Loading | 200 km/h (124.2 mph) |
| Point-to-Multipoint Radio : Package Checklist | |
| Package Contents | One Tsunami® MP-8260-BSU/SUA with two N-type surge protected connectors Or One Tsunami® MP-8260-BS9 with integrated dual polarized antenna, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit, One Antenna alignment (RJ11) dongle, One Grounding kit, One Quick Installation Guide |
| Point-to-Multipoint Radio : General | |
| MTBF | 250 000 hours |