Easy World Automation | Nexcom ICES 267S Computer-on-Module

Nexcom ICES 267S Computer-on-Module

  • Intel® 2nd generation Intel® Core™ processor family
  • Intel® QM67 PCH chipset
  • 1x DDR3 SO-DIMM socket support non-ECC DDR3 800/1066/1333MHz up to 8GB
  • Support SDVO
  • Type 2 COM Express 2.0 module support 6 Express lanes, 32 bit PCI interface, one IDE and Gigabit LAN

Description

The ICES 267S is a COM Express Type 2 basic module featuring Intel® QM67 PCH chipset and supports 2nd generation Intel® Core™ processor i5-2515E/ i7-2715QE. ICES 267S gears with DDR3 SO-DIMM memory socket up to 8GB DDR3 800/1066/1333MHz SDRAM single channel with un-buffered non-ECC support.

The ICES 267S integrated with Intel® HD graphics offers display expansion via SDVO to the carrier board. In addition, it also supports other display types including LFP or dual-channel LVDS. The high-performance ICES 267S COM Express module provides 4 x SATA, 8 x USB 2.0, and 6 PCIex1 lanes through the carrier board. It is compatible with ICEB 8050 carrier board and in-house designed ICES 267S F-kits from NEXCOM.


You can place an order for the Nexcom ICES 267S Computer-on-Module, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
Form factor -
Expansion -
Graphic Interfaces -
Super I/O -
I/O Interface -
Network -
Audio HD audio interface
EEPROM -
Watchdog Timer -
On-board RTC -
CPU Support Support 2nd generation Intel® Core™ processor family, FCBGA 1023
Chipset -
Main Memory One DDR3 800/1066/1333MHz SO-DIMM, up to 8GB
BIOS AMI System BIOS, Plug and play support, Advanced power management and advanced configuration & power interface support
Display Intel® HD graphics with DX11 support, Drive a standard progressive scan analog monitor resolution up to 2048 x 1536@60Hz, LFP LVDS interface to support 18/24-bit & single/dual channel interface
On-board LAN Intel® 82579LM Gigabit Ethernet, support iAMT 7.0 (supported with QM67 only), Support boot from LAN, wake on LAN function, Signals down to I/O board
COM Express Connector AB : VGA/LVDS/8 x USB2.0/HD Audio/3 x SATA/LAN/GPIO/LPC bus One PCIex4/two PCIex1/SMBus (I2C)/SPI BIOS, CD : IDE/PCI/SDVO
Power Requirements
Power Input +12V, +5VSB, +3.3V RTC power
physical characteristics
Dimensions 95mm (W)x 125mm (L)
Operating temperatures -15°C to 60°C
Storage temperature -20°C to 80°C
Relative humidity 10% to 90% (operating, non-condensing), 5% to 95% (non-operating, non-condensing)
Standards and Certifications CE approval, FCC Class A