Easy World Automation | Nexcom ICEK 8060-T6 Starter Kit

0

Nexcom ICEK 8060-T6 Starter Kit

  • COM Express Type 6, COM.0, Rev2.0 Evaluation Starter-Kit
  • COM Express Compact or Basic Modules with passive or active fan-sink
  • Bootable mini-SATA/ CFast-SSD with 10.4” LCD/ 18-bit LVDS Display
  • PCIex16, PCIex4, 2x PCIex1, 1x PEG/ DDI/ SDVO and mini-PCIe for Wi-Fi
  • 3xDDI/ 4xUSB3.0/ 2x SATA3.0/ 6x COM/ VGA/ LVDS/ 2x GbE/ 5.1 Audio S/PDIF
  • Integrated Flex-ATX PSU for AC 110/220V Input

Description

NEXCOM ICEK8060-T6 as proof-of-concept as a pre-configured system of COM Express starter-kit joins- design- win assistance package based on COM Express type 6, pin-out defined by PICMG, COM.0 Rev. 2.0 specification. NEXCOM configure and assembly to order service with COM Express Type 6 Basic Module (125x 95mm) like ICES667 or ICES668 with active heat-sink for embedded processors up to i7-3610QE or i7-3615QE (2x 2.3Ghz/ 6MB/ max. TDP 45W) of Intel® 3rd. Generation Core™ i7/ i5/ i3 processors to adapt a wide range of Industrial and embedded applications.

ICEK8060-T6 features bootable CFast/ SSD from external access or mini-SATA/ SSD via a mini-PCIe slot (half-/ full-size slot) from internal build-in onto ICEB8060 ICEK8060-T6 also supports legacy SATA 2.0 as bootable interfaces. ICEK8060-T6 support added-on card slots of 1x PCIex16, 1x PCIex4, 2x PCIex1, and 1x DDI (port B/ SDVO/ DP/ HDMI) slot may adapt our add-in EBK-A2HDMI (HDMI/ DP) for your evaluation of three independent displays during project development.

  • Faster system Time-to-market: ICEK8060-T6 as Type 6 starter-kit as a pre-configured system ready to help your system design customer to reduce total development cycle time from our proof-of-concept and design-assistance support for your target OS and applications.
  • Various CPU SKUs support Intel® 3rd. generation Intel® Core™ i7/ i5/ i3, Celeron Mobile processors supported by COM Express Types 6 Basic module (125x 95mm) like ICES667 or ICES668
  • Longevity for your multi-generation durable equipment: Once you pre-tested your OS and Application onto our ICEK8060-T6 starter kit, You may easy

to design your own customized I/O carrier solution board which you may adapt multiple COM Express modules for your target application.


You can place an order for the Nexcom ICEK 8060-T6 Starter Kit, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

General
Form factor Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm3, Integrated ICEB 8060 Type 2, Carrier CRB for COM Express Basic Module
Expansion 1x PCIex 16 (Gen 3.0) slot, 1x PEG/ DDI (port B for SDVO/ EBKA2- HDMI), 1x PCIex4 slot, 2x PCIex1 slot and, 1x mini-PCIe slot for Wi-Fi with optional SIM tray
Graphic Interfaces CRT: support analog VGA with DB15 connector on the I/O edge, LVDS: dual channels 18/ 24-bit LVDS connector (dual DF-13-20P)
Super I/O iTE IT8783
I/O Interface Serial COM: 6 ports (1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by Ring), 5x internal box-header 2.0 pitch to support RS232), 4x USB 3.0/ USB2.0 ports by stack Type A on edge, 3x USB 2.0 by 4pins JST 2.0mm header connector, 1x internal USB 2.0 to mini-PCIe slot for external wi-fi module, 2x SATA 3.0/ SATA 2.0 ports, 1x mini-SATA by mini-PCIe slot for half-/ full size mSATA-SSD, 1x CFast slot for CFast-SSD/ SATA 2.0, PS/2: 2x 4pins header for Keyboard/ Mouse, GPIO ports: 2x + 8x pins header GPIO from COMe (default 5V TTL/ option 3.3V)
Network ETH0: LAN chip: from COMe CPU module, ETH1: 2nd. RJ45/ GbE port by Intel 82574L, Support total 2x RJ45/ GbE ports on the edge I/O
Audio HD Audio AL886 with 5.1 channels, Support external S/PDIF interface, Support internal pin-header for L/R speaker-out 2W/ 4 Ohm
EEPROM 1x 2K EEPROM to record PCI Express Lane configuration, ATMEL AT24C32 (or C02) and address 0x57 or (0xAE)
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C)
On-board RTC On-chip RTC with battery BR2032
Power Requirements
Power Input Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit

related products