MOXA MGate 5114 Industrial Ethernet Gateways | Easy World Automation

0

MOXA MGate 5114 Industrial Ethernet Gateways

  • Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104
  • Supports IEC 60870-5-101 master/slave (balanced/unbalanced mode)
  • Supports IEC 60870-5-104 client/server
  • Supports Modbus RTU/ASCII/TCP client(master)/server(slave)
  • Effortless configuration via web-based wizard
  • Complete diagnostic information for maintenance
  • Embebbed Modbus and IEC 101/104 traffic monitoring
  • Redundant dual DC power inputs and one relay output
  • microSD card for configuration backup and event logs
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV built-in isolation protection
  • Built-in Ethernet cascading for easy wiring
  • Security features based on IEC-62443

Description

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 608705-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.


You can also find the MGate 5114-T model in the Industrial Ethernet Gateways.


You can Buy the MOXA MGate 5114 Industrial Ethernet Gateways via inquiring online at a competitive price in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Enjoy the cost-effective shipping options at a specific time in your location.

Specification

Ethernet Interface
Number of Ports 2 (1 IP; used for Ethernet cascading)
Speed 10/100 Mbps, Auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV (built-in)
Modbus TCP Mode: Client/Server, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. Number of Commands: 128, Max. Number of Connections:, MGate as Modbus TCP Client: 32 server connections, MGate as Modbus TCP Server: 32 client connections
Protocols Modbus TCP client/server, IEC 60870-5-104 client/server
Serial port specifications
Protocol Modbus RTU/ASCII master/slave, IEC60870-5-101 master/slave (Balanced/Unbalanced)
RS-232 Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Number of Ports 1
RS-422 Signals Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Signals Tx+, Tx-, Rx+, Rx-, GND
Serial Standards RS-232/422/485, software selectable
Connectors DB9 male
RS-485-2w Signals Data+, Data-, GND
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 kΩ, 150 kΩ
Terminator for RS-485 120 Ω
Isolation 2 kV (built-in)
Serial Communication Parameters
Data Bits 7, 8
Stop Bits 1, 2
Parity Even, Odd, Space, Mark, None
Flow Control RTS/CTS, RTS Toggle (RS-232 only)
Baudrate 50 bps to 921.6 kbps
General
MTBF 1,140,815 hrs
Power Requirements
Input Current 455 mA max.
Input Voltage 12 to 48 VDC
Power Connector Terminal block
Physical Characteristics
Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Housing Metal, IP30
Operating Temperature 0 to 60°C (32 to 140°F)
Weight 507 g (1.12 lb)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Vibration IEC 60068-2-6, IEC 60068-2-64
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Safety UL 508, EN 60950-1
Hazardous Location Class 1 Division 2, ATEX, IECEx*
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m, IEC 61000-4-8 PFMF
Storage Card Slot 1 microSD (SDHC) card slot supports up to 32 GB

related products