MOXA NPort Z3150 Serial to Zigbee Converter
- Zigbee to serial converter
- 1 10/100 Mbps Ethernet port and 1 serial port RS-232/422/485
- Two power inputs 12V DC to 48V DC
- Transmission distance up to 100 meters
- 2dBi antenna
- Brand: MOXA
- Product Code: NPort Z3150
Description
The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. A user-friendly utility is provided to configure the device type and network settings in a few simple steps.
You can also find the NPort Z2150-T, NPort Z2150, and NPort Z3150-T models in the Zigbee Converters.
Discover industrial automation
solutions appropriate to your needs, and easily
inquire about the MOXA NPort Z3150 Serial to Zigbee Converter through our user-friendly website via one of our Middle
East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).
Specification
| ZigBee Interface | |
|---|---|
| RF Standard | 802.15.4/ZigBee compliant |
| Frequency Band | 2.4 GHz |
| RF Data Rate | 250 kbps |
| Rx sensitivity | -96 dBm |
| Tx Power | 4.5 dBm (Max) |
| Transmission Distance | Up to 100 m (open space) |
| Antenna | 2 dBi |
| RF Channel | 16 channels |
| Network Topology | Star, Mesh, Cluster tree |
| Security | 128-bit AES encryption algorithms |
| Hardware | |
| SW1 | Pull high/low resister, Termination for RS-422/485 |
| Reset Button | Reset to default |
| Serial Interface | |
| Number of Ports | 1 |
| Serial Standards | RS-232/422/485 |
| Connector | RJ45 |
| Serial Line Protection | 1 kV surge protection |
| RS-485 Data Direction Control | ADDC (Automatic Data Direction Control) |
| Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 2 |
| Parity | |
| Flow Control | RTS/CTS, XON/XOFF |
| Baudrate | 50 bps to 921.6 kbps |
| Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w | Data+, Data-, GND |
| Software | |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Configuration | Web Console |
| Firmware Upgrade | Windows Utility, Web Console |
| Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | 120 mA @ 12 V |
| General | |
| MTBF | 1,109,589 hrs |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| Physical Characteristics | |
| Housing | Aluminum |
| Weight | 780 g (1.72 lb) |
| Dimensions | Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in), With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in) |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% RH |
| Safety | UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal:0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIPs |
| Radio | CE (ETSI EN 301 893, ETSI EN 300 328, ETSI EN 301 489-1-17, ETSI EN 301 489-1) |
