Easy World Automation | Beijer JetWave 3220 Dual radio industrial wireless AP-bridge

Beijer JetWave 3220 Dual radio industrial wireless AP-bridge

  • Dual radio 802.11a/b/g/n 2.4G/5G configurable
  • High speed up to 300 Mbps
  • Wireless redundancy and security
  • Default 360° up to 80 m
  • EN50121-4 and e Mark
  • IP31, -40~70 °C

Description

The JetWave 3200 series is an industrial 802.11n/ a/b/g Wireless AP which offers a high performance and reliability wireless solution for both 2.4G and 5G radio band. With the JetWave 3200 series wireless access point, a network designer will easily achieve the integration of wired and wireless networks. With the new generation 802.11n MIMO technology, the multi-radio offers a high data rate of up to 300Mbps per radio, provide flexible wireless backbone deployment options, and provide the redundant wireless connections to increase the reliability of the entire wireless network. The JetWave 3200-M12 series equips with dual Gigabit Ethernet M12 anti-vibration connector for vehicle installation.

The JetWave 3200 series can function as an AP/CPE, WDS modes for different point to point or point to multiple point network applications. The additional Routing mode allows to separate the LAN and WLAN to different IP subnet and perform NAT routing. The advanced features include LAN to WLAN Link Fault Pass-Through, Dual Radio Bridging, and Redundancy, high-speed gigabit Ethernet transmission, Wireless QoS (WMM), and complete wireless security and packet encryption.

The JetWave 3200 series is an industrial-grade design with the significant features of gigabit PoE+, dual 24V(12~48V)DC power input, IP31 Housing and Digital Input/Output. The design of the EN50121-4 approved and wide operation temperature design allows users to install the device under harsh environmental conditions.


You can place an order for the Beijer JetWave 3220 Dual radio industrial wireless AP-bridge online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.

Specification

Interfaces
10/100/1000BaseT(X) Ports 2x 10/100/1000Base-T RJ-45 (JetWave 3220)
Modulation Type 802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)
PoE Ports : IEEE 802.3at PoE+ Complaint in Ethernet Port 1
Wireless Security IEEE 802.11i
WLAN Operation Mode System: Bridge or Router, Wireless: Wireless Access Point, Wireless Client WDS-AP, WDS-Client, Redundant AP, Redundant Client for wireless redundancy
WLAN Standards IEEE 802.11a/b/g/n
Transmission Rates IEEE 802.11a, g: 54 Mbps, IEEE 802.11n: 300Mbps @ 40MHz
Digital Inputs 1x Digital Input, 0: +3V max., 1: +11V~+30VDC
Console Port 3-pin Diag. socket for Diagnostic/CLI
Security
Security Multi-SSID (up to 8x ESSID for each radio)
Power Requirement
Input Current -
Input Voltage Dual 24V (12~48VDC) input
Power Consumption Max. 10 Watts @ DC 48V, depend on Radio TX power
Reverse Polarity Protection -
Physical Characteristics
Humidity 5% ~ 95% (operating)
Dimensions Packaged 156x117x22mm
IP Rating IP31
EMC CE EN55022/24, FCC part 15B Class A Railway
EMI -
Weight (PACKAGED) 1.5 kg with package, without optional accessary
EMS -
Housing Industrial IP31 Aluminum
Installation Din-Rail, Wall-Mount, Celling-Mount (Option Accessory)
Standards and Certifications Railway Roadside EN50121-4 EMC Certification, Radio : EN 300 328 V1.8.1, EN 301 893 V1.7.1, EN301 489-1/17(WIFI)
Operating Temperature -40 ~70°C
Safety EN60950-1
Storage Temperature -40 ~ 85°C
General
Management Web GUI, Korenix View Utility, SNMP, NTP, IP Setup, DHCP Server/Client, Management VLAN, Configuration Backup/Restore, Reload Default
LED Indicators
MTBF -