MOXA DA-820-C8-DP-HV-W7E Wide Temperature Computer | Easy World Automation

MOXA DA-820-C8-DP-HV-W7E Wide Temperature Computer

  • Intel Core i7 dual/quad-core processor with Intel QM77 Express chipset
  • 2 x 204-pin SO-DIMM ECC DDR3 sockets, supporting un-buffered ECC DDR3 1333/1600 memory at 1333 and 1600 MT/s, 16 GB max.
  • 6 USB 2.0 ports for high-speed peripherals
  • 3 PCIe x1 slots and 2 PCI slots for expansion modules 
  • 1 PCIe x16 slot for an additional video card
  • Highly reliable design, supporting dual power, RAID 0/1/5/10, and PRP/ HSR technology (with PRP/HSR expansion module)
  • Cybersecurity function
  • IEC 61850-3 (general requirements for electrical substation automation, EMC Level 4, C3, Bm)
  • IEEE 1613 compliant (environmental and testing requirements for communications networking devices in electric power substations)
  • IEC 60255 compliant (measuring relays and protection equipment)

  • Brand: MOXA
  • Product Code: DA-820-C8-DP-HV-W7E

Description

The DA-820 is based on the Intel® Core™ Celeron, i3, and i7 CPU and QM77 chipset, which supports the standard x86 OS and comes with 2 VGA ports, 6 USB ports, 4 Gigabit LAN ports, and 2 3-in-1 RS-232/422/485 serial ports. The DA-820 is equipped with a 4 SATA disk interface and supports RAID 0/1/5/10 functionality. The DA-820 is specifically designed for substation applications that require precise time synchronization and adherence to the IEC 61850-3 standards. The flexible design makes the DA-820 suitable for local SCADA, environmental monitoring, video surveillance, protocol conversion, and PRP/HSR redundancy applications. In addition, the cybersecurity functions make the DA-820 an ideal solution for secure network communication applications. The DA-820 complies with the IEC 60255 standards to enable the protection of electrical relays in a smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection equipment and compliance ensures that the DA-820 will work reliably and seamlessly with IEDs (intelligent electronic devices) as a part of the robust substation automation system. The housing is a standard 3U, 19-inch wide, rack-mounted rugged enclosure. This robust, rack-mountable design provides the hardened protection needed for industrial environment applications.


You can also find the DA-820-C8-DP-LVDA-820-C8-SP-LV, and DA-820-C8-DP-HV models in the x86 Computers.


Experience the convenient way to purchase the MOXA DA-820-C8-DP-HV-W7E Wide Temperature Computer in the Middle East (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman). Our sales experts will provide the most helpful information about the price and sale conditions for a wonderful buying experience.

Specification

Interface
LAN Auto-sensing 10/100/1000 Mbps ports x 4• Ethernet 1 to 3: Intel 82574 gigabit Ethernet controller, Ethernet 4: Intel 82579 gigabit Ethernet controller supporting Intel AMT technology (C7 and C8 models only)
Magnetic Isolation Protection 1.5 kV built-in
Computer
CPU Intel quad-core i7-3612QE 2.1 GHz processor
System Chipset QM77
OS (Optional) 64-bit Debian 7, 64-bit Windows Embedded Standard 7, 64-bit Windows 7 Professional for embedded systems
System Memory Max. 16 GB capacity (204-pin SO-DIMM x 2, each supporting un-buffered ECC DDR3 memory at 1333 and 1600 MT/s, 8 GB Max.)
BIOS SPI Flash 64 Mbit BIOS, PCI Plug & Play, ACPI function support
USB Rear panel: USB 2.0 hosts x 4, Type A connector, Front panel: USB 2.0 hosts x 2, Type A connector
Display
Resolution CRT display mode with pixel resolution up to 2048 x 1536 at 75 Hz
Graphics Controller Intel® HD Graphics 4000
Display Interface 2 VGA outputs (DB15 female connector)
Serial Interface
Serial Standards 2 RS-232/422/485 ports (DB9 male)
Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
LED Indicators
System Power, Storage
LAN 100M x 4, 1000M x 4
Serial TX/RX
programmable LEDs 8 programmable LEDs
Power Requirements
Input Voltage High Voltage: 100 to 240 VAC/VDC, 50/60 Hz, 1 A, Low Voltage: 24 to 110 VDC, 4.7 A
Multiple Power Supplies SP: Single power supply, DP: Dual power supplies
Power Consumption 60 W
General
Alert Tools Built-in buzzer and RTC (real-time clock) with lithium backup battery
Automatic Reboot Trigger Built-in WDT (watchdog timer) supporting 1-255 level time interval system reset, software programmable
Storage Expansion 4 SATA 2.0 interfaces, supporting RAID 0, 1, 5, 10, hot-swappable
Physical Characteristics
Dimensions 361 x 440 x 133 mm (14.23 x 17.32 x 5.24 in) (without rackmount ears)
Housing SECC sheet metal (1 mm)
Operating temperature -40 to 60°C (-40 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Relative humidity 5 to 95% (non-condensing)
Standards and Certifications Telcordia (Bellcore) Standard TR/SR
EMC EN 61000-6-2/6-4
Weight 14 kg (31.11 lb)
Anti-Vibration 3 mm (2-9 Hz), 10 m/s^2 (9-200 Hz), 15 m/s^2 (200-500 Hz) @ IEC-61850-3, IEC 60870-2-2/Bm/(3M6)/(4M6), sine wave, 2-500 Hz, 1 Oct/min, 10 cycles, 2 hrs 40 mins per axis
Safety LVD, UL, cUL
Green Product RoHS, CRoHS, WEEE
Anti-Shock 100 m/s^2 @ IEC-61850-3, IEC 60870-2-2/Bm/(3M6)/(4M6), half sine wave, 11 ms
EMI CISPR 22, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV, IEC 61000-4-5 Surge: Power 4 kV; Signal 4 kV, IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8: 20 A/m, IEC 61000-4-9: 300 A/
Mounting Standard 19-inch rackmount