MOXA ICF-1170I-M-ST CANbus to Fiber converter
- CANbus to multimode fiber optic converter
- Power Input 12V DC to 48V DC
- Brand: MOXA
- Product Code: ICF-1170I-M-ST
Description
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with an alarm contact relay to ensure that your CAN bus system will remain online. Fiber Test Mode Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the TX side, the Fiber Rx LED will light up.
You can also find the ICF-1170I-M-ST-T model in the Protocol Converters.
Easy World Automation offers the
easiest way to buy the MOXA ICF-1170I-M-ST CANbus to Fiber converter in the Middle East (UAE (Dubai), KSA (Al Khobar,
Riyadh) and Oman) at the lowest price through online inquiring. Our sales
experts will contact you to fulfill all your industrial
automation needs.
Specification
CAN Communication | |
---|---|
CAN Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND) |
Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
Connector Type | 3-pin removable screw terminal x1 |
Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
Transfer Rate | Up to 1 Mbps |
System Delay | 150 ns |
Isolation Protection | 2 kV |
Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
Fiber Communication | |
Connector Type | ST (multi-mode) fiber ports |
Power Requirements | |
Input Voltage | 12 to 48 VDC dual power for redundant power |
Input Current | ICF-1170I: 221 mA @ 12 VDC, Alarm Contact: 1 relay output with current-carrying capacity of 1 A @ 24 VDC |
Voltage Reversal Protection | Protects against V+/V- reversal |
Overcurrent Protection | 1.1 A (protects against two signals shorted together) |
General | |
MTBF | 792,085 hrs |
Physical Characteristics | |
Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
Housing | Metal |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Weight | 178 g (0.39 lb) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Safety | UL 508 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 2 kV; Signal: 1 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF) |
Green Product | RoHS, CRoHS, WEEE |
Freefall | IEC 60068-2-32 |