Beijer ST-2748 Digital output module
- 8 relay outputs
- Normally Open(NO)
- Max 250 VAC
- 2.0 A
- Brand: BEIJER
- Product Code: ST-2748
Description
The FnIO S series is a micro modular remote IO-system from Crevis,
which contains a wide selection of digital and analog modules as well as
special modules. Together with a selected bus/ node module, the system is
easily combined to make standalone IO-nodes.
The IO-system, which has an IP20 enclosure, is installed on a
standard 35 mm DIN rail. Stable communication between the modules in the node
is guaranteed via a unique sliding contact system.
A standard IO module is only 12 mm in width, and when using 16
channel IO modules a complete node is made up of 64 IOs of only 90 mm in width.
The FnIO S series supports known bus systems such as Profibus DP/V1, CC-Link, CANopen, Modbus-TCP, Modbus-RS232, and Modbus-RS485.
You can place an order for the Beijer ST-2748 Digital output module online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Specification
Power Requirements | |
---|---|
Current consumption | 235 mA @ 5.0 VDC |
Input specification | |
I/O connector | Removable terminal block, cage clamp |
Output specification | |
Output type | Relay |
Output voltage range | 5~28.8 VDC @ 2.0 A resistive,48 VDC @ 0.8 A resistive, 110 VDC @ 0.5 A resistive, 250 VAC @ 2.0 A resistive |
Output delay | ON to OFF: 10 ms, OFF to ON: 10 ms |
Output relay lifetime | 300 k cycles resistive, 100 k cycles inductive |
Initial contact resistance | 20 mΩ |
Physical Characteristics | |
Mechanical size | 24mm x 99mm x 70mm |
Module weight | 200 g |
Mounting | 35mm DIN rail |
System indicators | 8 Green Output State, 1 Green / Red BUS State |
Humidity | 5-90% non-condensing |
Operating temperature | -20° to + 55°C |
Storage temperature | -40° to + 85°C |